Mindestic GlosPro 1.1.3

[Holidazed]

What is the difference between this Glossary and the vbGlossary addon?

[klaush]

Great update! I was waiting for this! Thanks a lot!

One issue was told already: the toggle of disable/enable the image set the other way, enabling->disables and vice versa.

Anyway, fantastic stuff!

[SS9267547]

RS_Jelle: Thank you! I can look into the edit/delete own options and perhaps the disabled but thats what the admincp is for is it not? :)

dendrob: Your welcome! Okay will look into that option problem but I'm not sure about the other issue your having. Will have to wait and see if it comes up with anyone else, might be a update problem.

Dark Blade: Your welcome!

Keyser Soze: Your welcome! Now with the request, do you mean you want to be able to select which forum has the feature on and which on dosn't?

bitg: If you mean the difference between vBGlossary and Mindestic GlosPro, its the same, I just felt like changing the name to make thing dificult lol.

klaush: Your welcome!

[dendrob]

SS92 - the other issue was my fault. Something messed up in the template. it had nothing to do with the mod - my bad ! Great job !

[tbaleno]

No unknown problems to report so far ;)

It was pretty painless.

[caliman]

Painless upgrade.
I did notice that 'delete' doesn't work from the glossary pulldown - it just loads a blank page. It does work from admincp.

[Holidazed]

bitg: If you mean the difference between vBGlossary and Mindestic GlosPro, its the same, I just felt like changing the name to make thing dificult lol.OK... I don't get it... Are you joking?
Is this really the same?
Are you planning on updating the other one?

[SS9267547]

tbaleno: Good to hear!

caliman: I'll look into that problem.

bitg: Haha no I'm not joking, this is vBGlossary, just now I'm calling it Mindestic GlosPro. So yes the 'other' one would be updated. :)

[Holidazed]

bitg: Haha no I'm not joking, this is vBGlossary, just now I'm calling it Mindestic GlosPro. So yes the 'other' one would be updated. :)So I do not need to do an update if I have the latest version of vbGlossary?

[SS9267547]

Bitg, if you want the latest version of vBGlossary, this would be it. Technically speaking Mindestic GlosPro 1.1.3 is vBGlossary 1.1.3. (update for 1.1.2) I would update to this version if you want to use the cross linking feature. Hope I'm making sense. So if your system still says vBGlossary you should update. ;)

[cassis2k]

Nice...........Clicks Install :)

[louis_chypher]

***** Great Work! Thank you very much.*****

I noticed that when the crosslink tooltip box showed up the glossary term and the word "Click" ran into each other. I found in the functions_glossary.php file



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



and



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



I changed them to display a space after the glossary term:



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



and



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



*shrug*

[Renada]

Hi,

Everything is working wonderfully for me except the crosslinking. I've enabled everything in the AdminCP - is there something else I need to do/enable to make it work?

Thanks,
Renada

[GrendelKhan{TSU]

looks awesome!! (er...why the name change? Mindxxxx Glosxxx something is hard to remember but vbGlossary is easy, imo).

eitheway...can't wait to check it out!

anyword on 3.6 compatibilty?

[dendrob]

btw, I think you already fixed this bug, but somehow it re-appeared

When you define a term, and the term is contained in a definition it links back to itself..ie

Velamen - A thick layer of corklike, water-absorbing cells surrounding the roots of epiphytic orchids. The Velamen acts much like a sponge when moisture is present and it contains canals and channels to move the water inward.

the word velamen will point back to its own definition

[Morrighan256]

Fixed, working, thank! *clicks install*

[caliman]

SS9267547 - I've noticed that I can't edit the titles of glossary terms - at the very least - change their case - FYI.

Other than that and the delete bug I mentioned with the pulldown, it appears to be working as designed.

[bada_bing]

Will install soon.. Nice hack ...

[Serenity]

i noticed in the readme files it states
"Crosslinking does not work with all php / server versions. Fix has not been confired yet with users having this issue"

i was wondering what version of php and server versions are running the crosslinking in the forums.

it's wierd because crosslinking in the glossary works just fine, but nothing for the forums :/

thanks! and awsome work!!!!!!!

[Serenity]

ok, so after i posted this i went back into the forum and crosslinking sort of works. it takes away the formatting of the posts like line spaceing and inserts <br /> instead and crosslinks it to the glossary. (yes there is a BR term in there and thats why it happens) i don't want to remove the br term from the glossary because, well, it's needed lol

so,
is there anyway to make this feature "smart"?

[bwack]

crosslinking seams to be working but only for certain users.

my forum is still in test mode but here is a thread with some examples:

click here (http://www.bwacksforum.com/forums/showthread.php4?t=11)

i've done some modding to the templates for design reasons but thats it. if anyone knows where to point to first i can post some code...

thanks for any help

awesome mod by the way. i'm sure its either user error or something simple

clicks install!!!

bwack

[SS9267547]

louis_chypher: So its a problem with the spacing then? I'll look into that. Thanks.

Renada: I think I messed something up with the crosslink option, you might have to disable it to make it enable lol. As well check the permissions and see if your usergroup can use the glossary. Check and see if that fixes the problem.

GrendelKhan{TSU: Yeah well I was bored at the time lol. As for compatiblity with 3.6 I heard it works but I might do a offical release later.

dendrob: Yeah I think its one of those things I thought I completed but I didn't, I'll look into that. Thanks.

caliman: Can you explain where you are when you are triing to edit your stuff.

Serenity: Yeah its the greatest, it has its issues which I'm yet to figure out.

bwack: From what I see on your forums its an issue with the hack. It won't crosslink any terms if they are the first word in a sentance, well some sometimes haha. Its not perfect and still needs work.

[caliman]

caliman: Can you explain where you are when you are triing to edit your stuff.


Sure, the pulldown option 'edit glossary' to the right of the entry allows you to edit it, but does not save the change even though it says it was successful. I have to edit the title from the admincp.

[louis_chypher]

Info: The two terms in the glossary are 'play' and 'party'

Issue: When there are two glossary terms next to each other (cross linking is enabled) the displayed info is:

This is what is shown on screen:



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------





This is the HTML source code:


Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------

[Polo]

cool hack!

[jgommel]

I've been adding Glossary Items for nearly an hour when a tester contacted me to tell me that he's seeing the following error on pages inside and outside of the Glossary.

Warning: preg_replace(): Compilation failed: missing ) at offset 29 in /includes/functions_glossary.php on line 56

An example would be if you were to click on a Glossary term, you get the Glossary term, but you also get the error at the top of the page (Above the header)

I'm running VBulletin v3.5.4 with vBAdvanced v2.1.0
GlosPro Version 1.1.3

I've set the permissions so that you can see the errors for your self:
http://www.neosmut.com/vb/glossary.php?do=listglossary&c=1

Note: I do not have a link on the site anywhere yet since I'm still adding terms etc... To access the the glossary, you'll need to key in the address manually.

[tbaleno]

I'm also having the delete problem. Delete works from the admincp but not from the glossary page on my forums.

Looks like the GLOSSARY_DELETE template doesn't exist.

[louis_chypher]

I've been adding Glossary Items for nearly an hour when a tester contacted me to tell me that he's seeing the following error on pages inside and outside of the Glossary.

Warning: preg_replace(): Compilation failed: missing ) at offset 29 in /includes/functions_glossary.php on line 56


Try disabling crosslinking, just a hunch.

[kether1]

Hi Lucas! This is a great addition to my forum! We love it and the members are very happy too. I do have two things I would like to ask about.

1. Is there a way to limit the glossary so that it will only highlight/link one term per thread instead of just per post? For example: If a member types 'Cactus' in a post, and that word is in the database, the glossary will link it one time within that post; however, if the next person also types the word 'cactus' the glossary will link that term again in the next post. Within the same thread, it starts to become a bit of overkill. I would love it if there were a way to make it so that it would not repeat a word within a thread until say five posts down, or the next page, etc...

2. Is there any way to get the glossary to see the difference between Cactus and cactus. I put the term in lower case inside the database, but when a user types the proper name, it forces the word to be lower case because that is the way the word is inside the glossary. I would have the same problem if the word were capitalized in the glossary, just in reverse.

I hope you or someone who is more familiar with this awesome modification can help!

Cheers!
Kether

[Coach_Guru]

Hi, the hack is great but I can't visualize ext_term.gif :(

[kether1]

Hi Lucas! This is a great addition to my forum! We love it and the members are very happy too. I do have two things I would like to ask about.

1. Is there a way to limit the glossary so that it will only highlight/link one term per thread instead of just per post? For example: If a member types 'Cactus' in a post, and that word is in the database, the glossary will link it one time within that post; however, if the next person also types the word 'cactus' the glossary will link that term again in the next post. Within the same thread, it starts to become a bit of overkill. I would love it if there were a way to make it so that it would not repeat a word within a thread until say five posts down, or the next page, etc...

2. Is there any way to get the glossary to see the difference between Cactus and cactus. I put the term in lower case inside the database, but when a user types the proper name, it forces the word to be lower case because that is the way the word is inside the glossary. I would have the same problem if the word were capitalized in the glossary, just in reverse.

I hope you or someone who is more familiar with this awesome modification can help!

Cheers!
Kether

Anyone? Is either of these possible? Thanks! Kether

[Eagle Creek]

Looks great!

But I have a question.

When I want to use the crosslink feature in posts, does HTML have to be enabled? (can't I make a custom BBcode for it then?)

[kether1]

Bump for post 282

[Nuguru]

Hello Everyone,

This looks like a very cool add-on. Before I install, I am interested to know if this has a branding free option? If so, where can I get more info on that?


Thank You,

Nuguru :)

[murrtex]

thanks SS9267547,
my vb version 3.6.0
I installed your hack.Everythings is working fine.But I can't delete term.
My permissions are ok.

I get this error
Warning: Division by zero in /includes/functions.php(4750) : eval()'d code on line 152

How can we fix that??

[kether1]

Bump for post 282. Anyone out there who can help? Thanks in advance!

[rockaffe]

crosslinking in post doesn't work for me :surprised:
any suggestion?

[RS_Jelle]

crosslinking in post doesn't work for me :surprised:
any suggestion?
It isn't working, so the best thing to do is turning it off (and wait on a new release) ;)

[bada_bing]

anyone have any problems running this in vb 3.5.3?

[UltraVR]

Hey! This is the most wonderful hack in the universe!

I seem to be having a bit of an issue, though. I tried to make the tooltip show $glossarydescription, and truncate it, which would work, but I had a problem: the tooltip breaks if the description contains another crosslink entry.

Can anyone think of a possible solution to this dilemma?

[bada_bing]

I need some help with this I have it installed but when I try to delete a term from the glossary I get this error

Warning: Division by zero in \includes\functions.php(4320) : eval()'d code on line 88

[bada_bing]

Is there a way to add a feature controlled on/off in admincp to allow certain usergroups to be able to turn the glossary on/off on an individual basis. I have several members that dont like to use the glassary and want to turn it off for them?

This would be a great feature ..

[zeropaid]

Does anyone have a download of a file that contains some basic internet terms that I can load into my glossary? I just installed but i would like to get the basics outta the way.

If you have one, PM me or post here. thanks

[bada_bing]

Is there a way to add a feature controlled on/off in admincp to allow certain usergroups to be able to turn the glossary on/off on an individual basis. I have several members that dont like to use the glassary and want to turn it off for them?

This would be a great feature ..
Also is there a way to control what forums the glossar terms are actually displayed. I would like the glossary terms to actually only show up in the newbie forum rather then all the forums..Please Please help....

[bada_bing]

Boy support Su@ks on this hack...

Can someone tell me how I can approve a submitted term? Im on admincp under Mindestic GlosPro - Moderate Glossary and see there are submited terms but for the life of me cant figure out how to approve them..Yes im logged in as admin?

[Warlord]

*Clicks Install*

Great hack! I'm using it as a "Comic Book Glossary" which provides biographies, etc for super heroes, teams and significant items in the comic book world.

My question is this, whe you click on a category it lists however many definitions you specify, but it also lists the entire definition. Is there a way to only list the definition title, which links to the actual defiinition?

[Warlord]

Also, can anyone tell me how I can edit the main glossary page?

I tried editing the template simply named glossary assuming that would reflect the changes I made when visiting forum/glossary.php, but to no avail. :(

I just want to insert a welcome message explaining what it is and what it does etc.

bada bing, I'm more lost then you are, how did you set certain usergroups to require validation?

[Warlord]

Boy support Su@ks on this hack...

.......................

[fortnox]

Yeaaaah,

What a great hack:banana:

@SS9267547

Do you know anything about new Version? 1.1.4 and for vb3.6.x ?

Very Thanks !

[Warlord]

ummm I think he went into hibernation for the upcoming winter. :p

[murrtex]

my vb version 3.6.1 everything works but when I want to delete term from forum
I get "Warning: Division by zero in /includes/functions.php(4884) : eval()'d code on line 152" error..how can I fix that..please help

[EvilHawk]

my vb version 3.6.1 everything works but when I want to delete term from forum
I get "Warning: Division by zero in /includes/functions.php(4884) : eval()'d code on line 152" error..how can I fix that..please help

the GLOSSARY_DELETE template doesn't exist ;)

[murrtex]

thanks but there is no GLOSSARY_DELETE template that product-vbglossary.xml. :) check it.....

where can I find it..Or could you paste it here..best regards. Thanks

[murrtex]

is there anybody??

[bada_bing]

I have a slight issue that I want to reslove before I allow members to use this hack. Currently I can only do a search on terms or words that are 3 at least three characters long or I get this message

Please enter a term longer than 3 characters to do a partial search on.


I want my users to be able to search with a minimum of two characters instaead of three, how do I change this?

I've tried to change the setting in admincp under "Search Index Minimum Word Length" to 2 and still no go? Help Please

[murrtex]

Hellooooo

could you paste GLOSSARY_DELETE template here..best regards. Thanks

[fishhub]

Can i just install version 1.3 straight away? Or do it need to install previous versions followed by latest version to overwrite all?:surprised:

[interfx]

Before I install for 3.6.3 anyone have it working correctly???

Thanks -
InterfX

Yeaaaah,

What a great hack:banana:

@SS9267547

Do you know anything about new Version? 1.1.4 and for vb3.6.x ?

Very Thanks !

[fishhub]

i hv activated a usergroup permission on the following:

glossory permission>can view, can add, can edit, can delete.

But when i tested it, i can't get can delete function. Anyone knows how i can go about this?

TIA

[bada_bing]

I have a slight issue that I want to reslove before I allow members to use this hack. Currently I can only do a search on terms or words that are 3 at least three characters long or I get this message

Please enter a term longer than 3 characters to do a partial search on.


I want my users to be able to search with a minimum of two characters instaead of three, how do I change this?

I've tried to change the setting in admincp under "Search Index Minimum Word Length" to 2 and still no go? Help Please



Any help with this please?

[interfx]

I went ahead and installed, having same delete question...

With all of the posts in this message, has anyone figured this out yet?

Best work aorund is just doing it via AdminCP panel...

i hv activated a usergroup permission on the following:

glossory permission>can view, can add, can edit, can delete.

But when i tested it, i can't get can delete function. Anyone knows how i can go about this?

TIA

[interfx]

One last question, how do I create the glossary without using a glossary category? ie. I only have one glossary category, and just want main glossary to show up vs. choosing the glossary to look in (there's only one...)

Any ideas?

[bada_bing]

Any help with this please?



AM I INVISABLE HERE...I can t seem to get a simple responce...:cross-eyed:

[interfx]

I guess this thread is kind of slow... Anyone have just 1 gloassry that auto opens right into that glossary???

Thanks again -

One last question, how do I create the glossary without using a glossary category? ie. I only have one glossary category, and just want main glossary to show up vs. choosing the glossary to look in (there's only one...)

Any ideas?

[RS_Jelle]

I guess this thread is kind of slow... Anyone have just 1 gloassry that auto opens right into that glossary???

Thanks again -
Open glossary.php and replace:


Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------


with:


Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



And change the number (now 1) to the correct category id :)

[interfx]

That did it!!! Thanks so much for helping me out!

[SS9267547]

Well its been quite a while, in the past few months I haven’t had much time at all to work on any scripts on my free time so I'm sorry for the lack of support and updates. In fact it’s been so long since I worked on anything that I've been debating with myself if I should even continue work with this hack.

Nevertheless at this time I've decided to do some minimal work on the script however with the release of new vBulletin versions it will be awhile before I figure out where things are and before there is a new update released. Current plan is to have a new release out within 3 weeks time. Now when it comes to the new release there will most likely will only be a very small update for vBulletin 3.5.x series of this hack and after that there will be no more development for this series. This hack will now be ported over to work with 3.6.x series which in fact will most likely still work with the 3.5.x series but I will not be fixing any issue the script might have with older versions.

Now with the upcoming update I have reviewed all issues in this thread since I've left that have been reported and I will see if I can figure a way to fix them. Now as for support questions, while officially this hack will be "as is" so if you don't like it don't use it lol. Also I will not have time to answer to many technical support questions. I will try to answer a few questions in the next week, that includes yours bada_bing. You all have a good day now.

[SS9267547]

Okay let me see if I can answer some of those questions out there, thats if you guys still need them lol.

bada_bing: The admincp on/off individual crosslinking option has been add to the next update, liked the idea. With the forum specific option I also liked but we'll see if I can come up with a solution to that. As for the search option, let me know if you still want a temp solution to the character limit for the search option, if you can wait I have added a new option in the admincp so you can specify what you want.

louis_chypher: Thank you for bringing the two term issue, will look into that and see if I can figure out a solution to that.

kether1: I'm not sure if I can do a per thread option, but I'll need to find out if anyone else would really find it useful before I start on a solution on that. Perhaps for performance side of things it would be worth checking out. I would like more feedback on this issue. With the glossary figuring out the difference between lower case and capitalized text, I haven’t figured a way out with this. Feedback on this from other users would be good.

Coach_Guru: The ext_term.gif issue is something I missed in the CSS and I think this issue has been addressed now. Will be released on next update.

Eagle Creek: HTML option only needs to be active in the glossary options, not the main forum options.

murrtex: I'm not sure about the error your having. It might be with the crosslinking feature, try taking the feature off and see if that works. As for the missing template I have to recreate it since it seemed to have gotten lost lol.

rockaffe: You'll need to first make the feature active in the glossary options before it will work.

UltraVR: I will look into the problem with the tooptip breaking if it contains another crosslink entry. Try to have a solution for next release.

zeropaid: Next release I have plans on releasing some terms for the system as sperat installs but its not finalized yet.

Warlord: If you would like to just have it so the title is only shown when the terms list is displayed you'll just need to do some simple template editing. Take a look at 'glossary_listterms' template. At this time you can't set certain usergroups to require validation, its all or none at this time.

fishhub and interfx: Its a missing template issue, some how it got lost and needs to be recreated will be done for next release.

RS_Jelle: Will be adding those options to the next release that you asked for way WAY back lol.

Alright hope I didn't miss anything, if you have questions, feedback, errors, etc, do post, will get around one day lol. Also remember next release for vBulletin 3.6.X series is scheduled to be released on (12.09.2006). Have a good one all.

[bada_bing]

Okay let me see if I can answer some of those questions out there, thats if you guys still need them lol.

bada_bing: The admincp on/off individual crosslinking option has been add to the next update, liked the idea. With the forum specific option I also liked but we'll see if I can come up with a solution to that. As for the search option, let me know if you still want a temp solution to the character limit for the search option, if you can wait I have added a new option in the admincp so you can specify what you want.

louis_chypher: Thank you for bringing the two term issue, will look into that and see if I can figure out a solution to that.

kether1: I'm not sure if I can do a per thread option, but I'll need to find out if anyone else would really find it useful before I start on a solution on that. Perhaps for performance side of things it would be worth checking out. I would like more feedback on this issue. With the glossary figuring out the difference between lower case and capitalized text, I haven’t figured a way out with this. Feedback on this from other users would be good.

Coach_Guru: The ext_term.gif issue is something I missed in the CSS and I think this issue has been addressed now. Will be released on next update.

Eagle Creek: HTML option only needs to be active in the glossary options, not the main forum options.

murrtex: I'm not sure about the error your having. It might be with the crosslinking feature, try taking the feature off and see if that works. As for the missing template I have to recreate it since it seemed to have gotten lost lol.

rockaffe: You'll need to first make the feature active in the glossary options before it will work.

UltraVR: I will look into the problem with the tooptip breaking if it contains another crosslink entry. Try to have a solution for next release.

zeropaid: Next release I have plans on releasing some terms for the system as sperat installs but its not finalized yet.

Warlord: If you would like to just have it so the title is only shown when the terms list is displayed you'll just need to do some simple template editing. Take a look at 'glossary_listterms' template. At this time you can't set certain usergroups to require validation, its all or none at this time.

fishhub and interfx: Its a missing template issue, some how it got lost and needs to be recreated will be done for next release.

RS_Jelle: Will be adding those options to the next release that you asked for way WAY back lol.

Alright hope I didn't miss anything, if you have questions, feedback, errors, etc, do post, will get around one day lol. Also remember next release for vBulletin 3.6.X series is scheduled to be released on (12.09.2006). Have a good one all.
SS9267547,

Glad to hear you liked my feature requests.. As to the character restrictions on search if you can give me a rough estimated time for the next release I can wait HOPEFULLY though the new version is written for 3.5.x also PLEASE PLEASE.. Else I may need the temp fix for now

[SS9267547]

bada_bing since the search fix for you isn't complicated, I'll tell you where you can do to change it for now, when you update it will just override it and put in the new option for you. In the glossary.php look for the following code:



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



Now replace '3' with whatever number you want the limit to be.

[bada_bing]

bada_bing since the search fix for you isn't complicated, I'll tell you where you can do to change it for now, when you update it will just override it and put in the new option for you. In the glossary.php look for the following code:



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



Now replace '3' with whatever number you want the limit to be.
Thank you very much I will try this.

[SS9267547]

Well I'm ahead of schedule so the release for 12/09/2006 won't happen, its going to be now. Please note that version 1.1.4. of Mindestic GlosPro is the final version for vBulletin 3.5.X series and there will be no more development or support for this vBulletin series. However development for vBulletin 3.6.X series has start and at this time works for both versions. You may click on the following link for information on that.

http://www.vbulletin.org/forum/showthread.php?t=132632

The following is what you'll see in 1.1.4:

Fixed missing 'GLOSSARY_DELETE' template.
5 new phrases.
1 new template.
Updated manual for Mindestic GlosPro.

[dendrob]

I'm still on 3.5.4, once I upgrade to the 3.6.4 (within few weeks) will 1.1.4 glossary work on both versions of vB ? I mean, safe to upgrade, will it work on 3.5.4.

[SS9267547]

dendrob: There is alway a risk with this kindd of stuff. However if you wish to upgrade for the next forum version I already released a new version for 3.6.X. Simply upgrade when the new forums ready.

[dendrob]

I upgraded and worked fine.

btw, suggestion that would be very useful. I see you're planning the:

"Adding custom field(s) for each glossary term. (0% Complete)"

could you also set it so you can specify custom fields for categories?

ie. say you have a category for basic definitions (no fields required) and a category for "flowers", they will need extra fields

This way if somone enters a term to the glossary they won't have extra fields to fill in, but if somone enters a flower,

then they will fill in
Scientific Name:
Range:
Growing conditions:
Soil type:
etc, etc

This would come in very handy for me and I'm sure others wouldn't mind it either.

let me know if something like that would be possible

[SS9267547]

I think that would be possiable, still havn't figure how to do this yet lol, however if anything was added to the mod it would be for the 3.6.X series of the mod.

[louis_chypher]

Okay let me see if I can answer some of those questions out there, thats if you guys still need them lol.

louis_chypher: Thank you for bringing the two term issue, will look into that and see if I can figure out a solution to that.



An update on what we have found with the two term issue.

The issue crops up with when a glossary word has a subset word that is also defined in the glossary; such as the case of the words 'play' and 'play party'.
When the word 'play party' is used then there is an error (as previously described). For now we have removed from the glossary the word 'play'.

[Camz]

I have a problem when i put ON the Glossary Crosslinking. Any idea why?

My printscreen:

[SS9267547]

There are issues with the crosslinking feature. If you would like to use it you can try the vb 3.6 version which should work fine on 3.5 boards at this time anyway. Of course the crosslink feature for 3.6 version isn't at 100% yet either lol. :)

[louis_chypher]

Is there vB code that we can use for the glossary? Lets say the glossary crossliinking is off but I want a cross link to the glossary then I use [glospro]the word to cross link to[/glosspro] or if the glossary cross linking is on but I wish not to have a word cross link then I might use the word I do not want to cross link to?

[RvG2]

by the way, this works fine on 3.6.7 pl1. You can use this for the meantime till he fixed the improved crosslinking feature on 1.2.2 although this version worked super fine.

Thanks,

[rchelifan]

I just installed on 3.6.7pl1. Works perfectly. Thanks you very much!

I have one question: What template or how do I edit if I want to place an adsense below the Mindestic GlosPro Copyright of the glossary? I don't want to put it in the forum footer.

[rchelifan]

One more question. When a term is submitted the case get changed from capital to small letter. For example, I submitted IRCA and it is displayed as irca? Anybody know who can I fix that?

[mariocaz]

Is this working on 3.6.8 patch level 2 ?

[mariocaz]

Bump!!!

[mariocaz]

Anybody??

[bada_bing]

Not sure that this is of any help but I have this version http://www.vbulletin.org/forum/showthread.php?t=132632 working on 3.6.2 with no issues and the cross-link fearture actually works. I also installed Mindestic GlosPro 1.2.2 for 3.6x on my VB 3.5.x and all works good except the pop-up bubble does not work, now if I can get that working would be great.

[mariocaz]

Ok that helps, maybe I will install it, I need it a lot.

[mariocaz]

Mmmmm the problem is that the version 1.2.2 for the 3.6.x is not more available. :(

Anybody is using this version in 3.6.8 pl2 ?????

Help!!!

[bada_bing]

Does anyone know how I can fix this issue that when you move your mouse over a word that is defined in the glossary it does not format the text correctly. You can see my my screenshot. On my other site everything works good becuase when you move your mouse over a word that is in the glossary it's suppose to wrap the definision and change the background color.

[bada_bing]

Here is what it's suppose to look like

[bada_bing]

Any help Please???? I will pay someone to look into this issue and correct it for me. Please PM me if you are interested...

[bada_bing]

No one wants to help ha??

[dendrob]

This is an excellent mod, I'm surprised all this work is just being trashed. I'd hope somone would at least fix the security issues. This mod has a lot of potential too, it could be used as a database for all kinds of cataloging purposes, not just glossary.

[Mark Fortune]

Love this glossary, it is working well on 3.6.8 the only thing I can't get to work is the:

"# A B C D E F G H I J K L M N O P Q R S T U V W X Y Z"

to display. How can I add it it?

[mariocaz]

Any mod like this but for 3.7 gold ??, help!!!

[Konstantinos]

in modcp the vbglossary basics meny doesnt show while in admincp it works. of course the file is upload in modcp dir

[gutelaune]

Nice work in Version 3.7.0 :)

[Mondi]

Errm..

Where to find upload for vb 3.7.0?

:: Excuse - probably blind ::