A phpMyChat integration Hack

[Stasik]

Hi.... it is my first hack - phpProbe ;)
here is it... it was tested under vbb2x RC2 and phpMyChat 0.14.4

News:
Updated on 19.07.01
- FAQ has been add

Updated on 18.07.01
The hack is compatible with version 0.14.5 of phpMyChat
- there is some javaScript code there, so the hack will not work with browsers without JS support (phpMyChat will not work with these browsers too ;) )
- the Exit link in chat works ok now

Hack:
Step 1:
open /lib/index.lib.php3 in yours phpMyChat Derictory
find:


Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



replace it with


Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



Step 2:
open /lib/index.lib.php3 in yours phpMyChat Derictory
find:


Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



replace it with:


Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



Step 3:
open /exit.php3 in yours phpMyChat Derictory
find:



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



replace it with:


Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



ENJOY

FAQ:
Q: I`m getting "no" every time.
A: You need to upgrade a cookie option in your VB control panel. Write under: Options->Change Options->[HTTP Headers and output]->Cookie Domain your domainname ONLY (blabla.com).

Q: I`m getting "you need to register" error.
A: Enable chat using for not registered users in your phpMyChat config (/config/config.lib.php3).

Q: I`m getting "wrong password" error.
A: Make shure you have deleted all user accounts in your chat and have only administrative one. If you are logging is as administrator note that you have to enter your password EVERY time you are logging in.

Questions or Bug reports?
Post it here I`ll answer ASAP.

[Dakota]

Is there a demo of it? I would like to see it in action before installing it.

[Stasik]

there was a local demo of it, i`m searching a demo forum... IT WORKS REALLY :)

[polizist]

Your hack works fine for me, but i have a quastion:

Ho are users able to open a private room? They are not listed in the phpmychat user database i guess, so they can "only" chat, right?

Is there a chance to use the vbulletin database for all other actions (like open a private room)?

Best wishes, polizist

[MarkB]

Is phpMyChat hard on a server? I'm running on a virtual account, and would love to have this hack, but I'd like to know whether the chat script would have my host howling for my blood (or shutting down my account;)) first :)

[polizist]

well, we have it on our own server with a gig of memory. just try what happens ;)

[rmusic]

is there a php4 version of phpmychat because i cant use php3 on my site :(

[Stasik]

I think there is no php4 version

[Stasik]

Originally posted by polizist
Your hack works fine for me, but i have a quastion:

Ho are users able to open a private room? They are not listed in the phpmychat user database i guess, so they can "only" chat, right?

Is there a chance to use the vbulletin database for all other actions (like open a private room)?

Best wishes, polizist

Hi....

this things with other actions are not so easy to do...... i know theoretically how to do it, but i have no time and lust to do it :(

bye...

P.S. Nickname "Polizist" ist geil :)

[snyx]

I installed this hack, but it dont work? It just keeps saying "invalid password" no matter who trys?

[Stasik]

Hi

you have to allow the chat-use to unregistered useres (using setup.php3 or manually in config file)

--OR/AND--

you have to delete all users from chat and leave only Admin-nick

bye

[webhost]

Will it work with version 2.0.1 and phpmychat version 14.2 if so where do I place it because fix security holes is not found in version 14.2

Thanks

[Stasik]

hi

try to enter this text BEFORE
"require("./${ChatPath}config/config.lib.php3");"

if not then

try to upgrade your chat or post index.lib.php3 here

BYE

[webhost]

I am waiting to upgrade my chat until 15.0 comes up.

Here is the url http://chat.realwebhost.net

Here is the link to my forums http://forums.realwebhost.net

I have attached the zip file. I did try to place code where you stated and I tried this for the paths
board path I tried http://forums.realwebhost.net and also tried http://www.realwebhost.net/forums I think it should be the first one because that is how I get to my forums.

Niether worked gave a error saying bad path.

Then I tried chat path the same way switching the word forums with chat and I got the samew errors.
I have attached the file

Joey

[Stasik]

enter a hack code before:

"require("./${ChatPath}config/config.lib.php3");"

for the both path i will need a tree of your server.

[webhost]

this is the error I get with the attached file. I have attached the file to this thread with the script change in it
Warning: ChDir: No such file or directory (errno 2) in /home/realweb/public_html/chat/chat/lib/index.lib.php3 on line 60

Warning: ChDir: No such file or directory (errno 2) in /home/realweb/public_html/chat/chat/lib/index.lib.php3 on line 62
no

When I ftp in I have files and directories including public)html underneath this I have the forums directory which has forums/gobal.php and also the chat directory which is chat/chat/lib/index.lib.php

[Stasik]

your both path are not ok

try smth like this

fist
/home/realweb/public_html/forums/

second
/home/realweb/public_html/chat/chat/

[webhost]

Here is the script I put in and below that is the error I get.

chdir("public_html/forums");
require("http://www.realwebhost.net/forums/global.php");
chdir("./${ChatPath}");


Warning: ChDir: No such file or directory (errno 2) in /home/realweb/public_html/chat/chat/lib/index.lib.php3 on line 60
no

[webhost]

OK HERE is the script change you recommended and below that is the error I get

chdir("/home/realweb/public_html/forums/ ");
require("/global.php");
chdir("/home/realweb/public_html/chat/chat/");

==========================================

Warning: ChDir: No such file or directory (errno 2) in /home/realweb/public_html/chat/chat/lib/index.lib.php3 on line 60

Fatal error: Failed opening required '/global.php' (include_path='') in /home/realweb/public_html/chat/chat/lib/index.lib.php3 on line 61

[Stasik]

NOOOOOOO

here are the parts... i think they are ok

look and replace

//a VBB integration hack by Stasik - source parts were taken from other authors ;)
chdir("/home/realweb/public_html/forums/");
require("./global.php");
chdir("/home/realweb/public_html/chat/chat/");

[Stasik]

ok... write me a FULL PATH to your forum

[webhost]

I put this in

chdir("/home/realweb/public_html/forums/");
require("./global.php");
chdir("/home/realwhttp://www.vbulletin.com/forum/newreply.php?action=newreply&threadid=21329eb/public_html/chat/chat/");

Now go here and see what we get
http://chat.realwebhost.net

[Stasik]

u has a small tipp mistake there

but as i have seen in link it works... replace "no" wiht page that means "chat is only for forum registered members... please login yourself or register" or so that ;)

[webhost]

this is what I put in go to link and see result

print "/index.php3"; //Message if the user has no cookie
exit;

[Stasik]

you should write
require("./index.php3");


BUT IT WOULD NOT WORK!

you can foget the standart login page with this hack... :(

users without forum-accout can not use it :(

[webhost]

ok I changed go to link and see result

[webhost]

here is line 9 and 10 of my global.php file

// get rid of slashes in get / post / cookie data
function stripslashesarray (&$arr) {

[Stasik]

ups ;)

i dont know php very good.. delete the line ;)

replace "no" with HTML code

[webhost]

we tired I think the way you put require ./index.php3 in is correct problem somewhere else. I f you have it working could you direct to the url where I could see it in action?

[Stasik]

i`ll show you original php-code


~~
if ($bbuserid == 0)
{
print "<html>
Please register you or login you by our forum.
</html>
";
exit;
}
else
{
if ($bbusername == "" || (isset($bbusername))==0)
~~


somthing like this

[Stasik]

it had workt I had seen it.... it worked when there was "no"

[polizist]

Originally posted by webhost
we tired I think the way you put require ./index.php3 in is correct problem somewhere else. I f you have it working could you direct to the url where I could see it in action?

http://www.windelwinni.de/docs/forum/index.php

Click on a forum and read the red marked announcement. Into the annoucement click on "hier aufrufen" and enter the chat (or not, if you´re not registered)

but it´s german ;)

[webhost]

Thanks
It was a struggle, no good at German but I did manage to register on your board and go to the chat room. What version of vb and phpmycaht ar you using. Can you help me get mind working. I am using vb 2.0.1 and phpmychat version 14.2

Joey

Great looking board which I could understand the German though.

[polizist]

Well, i should be able to help you. What´s your problem?

We are using 2.0.0 with phpMyChat *14..5

What is the exact problem? Maybe you can post a link to your forum or chat and i´ll see what i can do. But i`m very busy, so please bepatience ;)

polizist

[webhost]

forum is here http://forums.realwebhost.net
chat is here http://chat.realwebhost.net

I have a chat button on the top of the opening page in my forum

Thanks you can read the previous posts and see what peoblems we were having.

[Stasik]

Hey webhost, it has worked by you, when there was written "no".

[webhost]

I never got it working.

[Stasik]

ok... lets start it new

edit ur /usr/lib/index.lib.php3
plaste bbefore "require("./${ChatPath}config/config.lib.php3");"

//a VBB integration hack by Stasik - source parts were taken from other authors ;)
chdir("/home/realweb/public_html/forums/");
require("./global.php");
chdir("/home/realweb/public_html/chat/chat/");

if ($bbuserid == 0)
{
print "no"; //Message if the user has no cookie
exit;
}
else
{
if ($bbusername == "" || (isset($bbusername))==0)
{
$getusername=$DB_site->query_first("SELECT username FROM user WHERE userid=$bbuserid");
$username=$getusername[username];
$bbusername = $username;
}
else
{
$username = $bbusername;
} }

$U = $username;

$pat = "[[:space:]]";
$repl = "";
$U = ereg_replace($pat,$repl,$U);
$pat = ',';
$U = ereg_replace($pat,$repl,$U);
stripslashes($U);

$N = 20;
$D = 10;
$Form_Send = 1;

//Replace admin with your administration nick
if($U != "Admin")
{
$PASSWORD="1";
}


If you had a login problems (bad password), I have forgotten to say, that you have to DELETE all exisind accounts and leave only admin-account

[webhost]

Sorry for the delay, got busy. Do you mean delete all users in my chat and just leave admin?

Joey

[Stasik]

yes, I mean it

P.S. The name must not be "Admin", but if you want it - you can do it ;)

[webhost]

ok I deleted all my users except admin which I go my bbman. Changed that in your script put in for the nick.I try to go to http://chat.realwebhost.net All I get is a blank screen with the word no. I went to my forums and signed in and clicked on my link in the forums http://chat.realwebhost.net and the same no. Now I have no users and it still doesn't work. Hope you will help me get this working.

Joey

[Stasik]

i know the answer!

go into you vbb adminpanel

go Options->Change Options->[HTTP Headers and output]->Cookie Domain

and write just "realwebhost.net" there

[webhost]

ok went to cookie domain and put in this .realwebhost.net
noticed the 2 dots, I also tried realwebhost.net with 1 dot

In your script under admin nick there is something like password=
"1" do I need to change 1 and put in my admin password for the chat room?

I am still getting no

I am using this link to board http://chat.realwebhost.net/index.php3

[Stasik]

u have not to change 1 to anyting.

i have tryed to login in at realwebhost.net/forums annd use the chat at realwebhost/chat/chat and it has worked.... :eek: try to change the cookie doman to "realwebhost.net", clear all cookies on your computer and try to login again

[webhost]

1 dot or 2 dots

[Stasik]

STOP STOP STOP

visit here http://chat.realwebhost.net/chat/

it works.. you have to change your chat derictory...

[Stasik]

plz read my previous post

you have to copy your chat from

realwebhost.net/chat/chat/ to realwebhost.net/chat/

and change then a path to chat in my hack

[webhost]

Changed the link to http://chat/realwebhost.net/chat/
Now it takes me to opening page and wants me to register is that correct?

[Stasik]

Hm... also... you as admin will have to enter your password each time you wants to login..... :( but other users have not to do it.... just edit the phpmychat config file and allow the UNREGISTERED users to use the chat

[Stasik]

the links chat.realwebhost.net/chat looks not very comfortable ;) i`ll advice you to copy your chat from /chat/chat to/ /chat/, but it`s only a advice ;)

[webhost]

don't run off one second

[Stasik]

ok.. i`m waiting

[webhost]

ok chat/chat is no more it is now realwebhost.net/chat

I have changed the path in your script from chat/chat to chat/

I have changed the link on the board to http://www.realwebhost.net/chat/

I logged out of my forum as admin and loggen as theone selected chat it took me to the main screen of the chat and put my name in the users slot but not ME i HAD TO REGISTER FIRST.

Ok its up to you now

Some time I believe I changed something in the chat that made someone register before they chatted could that be the problem?

I in picture that when someone signs in on my forum and selects chat it takes them to the chat room not to the opening chat page to register am I thinking right

[webhost]

do I still need to upload that index.html file to chat/

[Stasik]

yes you are thinking right...

no, u had`nt upload it any longer...

listen here..

the link chat.realwebhost.net ist working too

Some time I believe I changed something in the chat that made someone register before they chatted could that be the problem?

THIS IS A PROBLEM


correct it... and it will be work...

p.s. and change the images paths ;)

[webhost]

trying to remember, been along time since I done that, hold for a couple of minutes and let me look

[Stasik]

it will be a bit difficultly

it`s 2:33 nights here.. :)


but i`m wating just a 24/7 support :D

[webhost]

ok got it log in and go to chat, 2 problems once you get there.
1) try to exit you stay in chat room it will not exit.
2) under exit my stuff is gone or not showing up and it doesn't show any chat rooms all zero's


I'll meet you in the chat room

[Stasik]

yo good night... se ya tomorow, here ;)

[webhost]

Great Hack Its working Thanks for all your help.

Man this is great thing you do today. Been wanting this for about 4 months.

Joey

[webhost]

problems

[Stasik]

so.. i`ve tested it for 40mins... and i think i have found the bag

please upgrade your hack... i`m waiting for results ;)

[webhost]

upgrade with what. I installed version 14.5 last night. What do you want me to upgrade

[webhost]

ok I installed what you had put in the first post, still have the same problem.

[webhost]

ok I have uploaded your new hack. I tried to select the other rooms and it takes me back to the main chat signin page and tells me that my password doesn't match. Also look at this image I don't have any scroll bar, font, table or send message field box at the bottom or the ? mark in the left bottom. here is the image

[webhost]

yes I deleted all of version 14.2 and then installed 14.5 then I looked at chat room. It was fine.

then I installed your hack and you see what we are getting.

index.lib.php3 attached in a zip

how are you writing in the chat room, I don't have a place to write or I would respond

[Stasik]

check updrade with new version of hack

[webhost]

upgrade done problems

Parse error: parse error in /home/realweb/public_html/chat/lib/index.lib.php3 on line 1246

Fatal error: Call to undefined function: send_headers() in /home/realweb/public_html/chat/index.php3 on line 20

[Stasik]

i see :( stand by

[Stasik]

look at step2

compare it with your file

[webhost]

back online I think it is correct when you sign in see if you get welcome message. It was in step 2 when I copied it gave me one of these ' instead of this "

[Stasik]

i`m waiting for you... :D

[webhost]

trying the chat activity file I get this error.

Fatal error: Failed opening required './http://www.realwebhost.net/chat//lib/connected_users.lib.php3' (include_path='') in /home/realweb/public_html/chat/chat_activity.php3 on line 24

I tried putting it in http://www.realwebhost.net http://www.realwebhost.net/chat directory no luck. here is the file and the path I have placed in it.

[Stasik]

replace line 24

require("./${home/realweb/public_html/chat}/lib/connected_users.lib.php3");

with

require("./${ChatPath}/lib/connected_users.lib.php3");

[webhost]

Stasik you are the man. Working great will write up better response tomorrow.

Thanks Again

[ThePenguin]

I don't see the part where this is actually integrated into the index.php page. How do you do that?

Penguin

[Stasik]

hm.... its my secret ;)

[ThePenguin]

Um, please explain? I do appear to have the rest of it working now but obviously that is a key element.

[Stasik]

do you have paypal? :D

[ThePenguin]

No I don't. Never mind; I didn't see anywhere listed in this hack that you are charging for its use. Perhaps you should list that in the installation instructions.

[Stasik]

what are you speaking about? i`m dont charging for it its FREE!

[ThePenguin]

Then you really did lose me. Could you direct me to how to integrate it into Vbulletin? I've looked through this thread but don't see it. I also don't see it or any downloadable files or links in your initial thread on it.

I'm still not even sure that I can use this-- I don't know how rough phpMyChat is on a shared server.

PS-- Perhaps my question is not clear. I set up phpMyChat with the modifications listed in your instructions and it does appear to be running. On my Vbulletin, how do you get the box that says who is in the chat with the links? That's my question...

[Stasik]

ahm..... THIS isn`t in the hack.... it is just my private test :D

a small advice: look in "chat_activity.php3" :D

[amsch]

Anyone else having problems with this hack in netscape? I have it working correct in IE but I still get NO in netscape.
Amy

[Stasik]

hm....

Netscape suxx, it must die...

try to change the cookies options in netscape or "cookie domain" option in VBB control panel

[amsch]

What I have come up with is, it works in Netscape 4.75+ and fine in IE.

Just in case anyone else asks.
Amy

[Sukij]

HI..

I have problem on EXIT from Chat. After pressing EXIT in chat windows, it's not return to the vBulletin Forum. It's still in the Chat Windows.

Can you please help ? I have already modified the exit.php as mentioned in your instruction.

Thanks

[Sukij]

HI..

More info. in the index.php3 I also put

$exiturl = "http://203.154.80.13:90"; // the url the user will be redirected exiting the chat


So, it should be redirected back to the forum.

Thanks

[Sukij]

HI..

After install the hack, how can I choose the language.

Thanks

[Sukij]

HI..

After install the hack. How can I create new room ?

I try to use command /join

but the windows pop-up show that I need to register before I can create new room.

Thanks

[Stasik]

1) can u post yuur index.lib.php3 here?

2) where do u want to change language?

3) i fear its impossible :( (try to allow private rooms to unregistered users)

[Sukij]

HI..

1. I attached the index.lib.php3 in this post. The problem is still there, after press EXIT, usres are not redirected back to forum. Please help checking my attached file.
2. Language : After testing, I found that if the registerd users has been redirect from forum to Chat, they will be stop at the LOGON screen since password need to be enter where Language can be selected. But for the unregistered user, the system bring them directly to the chat windows without stoping at the LOGON screen, so these people can't choose language. Is it possible to move the language selection into chat windows instead of LOGON screen and allow users to select or change their language at any time.
3. Is ok, I understand now.

Thanks

[Sukij]

HI..

Let me confirm with you what is the correct way of the step..

1. In case of Registered Users. What happen after they press EXIT. Go back to the LOGON screen or Forum ?
2. In case of Unregistered Users. I think these people will be redirected back to forum. Am I correct ?

Thanks

[Sukij]

HI..

I solve the problem of Cannot EXIT already. It's my mistake to miss the STEP 2.

Thanks

[Sukij]

HI..

I don't care the Language Selection now since unregistered users can't go to the Chat page anyway. So, just fotgot it..

P.S. This question is not concern to Hack Integration. It's conern to the phpMyChat, which I think may be you have answer to my question. Who can you /save command in phpMyChat ? I'm admin, can use it without problem. How about other registered users, can they use /save command ? I ask this because when they issue the /save command, the chat just show another windows of the same chat screen.

Thanks

[Stasik]

i dont know about save command, ask one of your members

[Sukij]

HI..

Come back agin for one question.

If users have already registered with the vBulletin, and if they go to the Chat, can they create/join the private room with the /JOIN command ?

My current situation now is the vBulletin Registered Users cannot crate their own private room, only Admin now can create the private room. If they try to create the private room, the pop up windows will show that they are not registered. Since this integration hack is integrate with VB database, so it should recognize the the Registered User and allow to create the private room. Am I understand correctly ?

Thanks

[Stasik]

i fear you have right.. :(

[Sukij]

HI.

Do you mean users will not be able to create the private room even they are registered users of VB ?

[Stasik]

yes, if u cant allow the unregistered users to create own rooms it is impossible

[ethank]

Hack seems to work, but I can't login with the admin user. I made sure the password was set the same as it was in VBulletin, but it won't take it.

EThan

[Sukij]

HI..

Is it possible for you for the next future release, that the program can handle the private room feature for VB registered users. Thanks

[Stasik]

Originally posted by ethank
Hack seems to work, but I can't login with the admin user. I made sure the password was set the same as it was in VBulletin, but it won't take it.

EThan

Have you replaced the administartion nick in index.lib.php3?

[ethank]

Originally posted by Stasik


Have you replaced the administartion nick in index.lib.php3?

Works like a charm! Thanks. I'll be implementing this soon.

Ethan

[Stasik]

ok ;)

[AJR]

Hi everyone. I was as frustrated as many people about this phpMyChat hack. It works well, but I had to dig for 2 days to figure out how to integrate both vBulletin and phpMyChat together and not having all the code to add for both programs! Well, I have compiled 2 hacks...this one and Tom's forum index hack for phpMyChat. Plus I added a section of a couple of changes I made to make it more "user friendly". Read it once, read it twice, make sure you know what you want to add/change, then go do it!

[ethank]

Originally posted by AJR
Hi everyone. I was as frustrated as many people about this phpMyChat hack. It works well, but I had to dig for 2 days to figure out how to integrate both vBulletin and phpMyChat together and not having all the code to add for both programs! Well, I have compiled 2 hacks...this one and Tom's forum index hack for phpMyChat. Plus I added a section of a couple of changes I made to make it more "user friendly". Read it once, read it twice, make sure you know what you want to add/change, then go do it!

Cool, I'll try it out tommorow and tell you how it goes.

Ethan

[daroz]

Originally posted by AJR
Hi everyone. I was as frustrated as many people about this phpMyChat hack. It works well, but I had to dig for 2 days to figure out how to integrate both vBulletin and phpMyChat together and not having all the code to add for both programs! Well, I have compiled 2 hacks...this one and Tom's forum index hack for phpMyChat. Plus I added a section of a couple of changes I made to make it more "user friendly". Read it once, read it twice, make sure you know what you want to add/change, then go do it!

I do have one strongly recommended change...

To determine if a user is logged in, use this conditional instead of the one in your file. I had problems where it would always say you were logged in even if you were not.



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



So far so good... Though have some strange 'refresh' problems with phpMyChat I'm still looking in to.

-- Brian

[Stasik]

AJR, hehe, nice....

I`m gonna to make a upgrade, do u have ICQ?

[macom]

Hi, i need two admins... how can i do this ??

[Stasik]

Originally posted by macom
Hi, i need two admins... how can i do this ??

hi,
find the text



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



replace it with



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------




and change "Admin" and "Admin2" to registered user names

[macom]

TXH for the fast request...

I have replace the text in the "index.lib.php3"... but it dont works ? Sorry for my bad english...

What can i do now ??

[Stasik]

Da bracuchst du dich nicht zu entschuldigen *g*...

was hast du genau gemacht? beschreib ma?

[macom]

also ich habe den text in der index.lib.php3 so wie beschrieben angepasst... im forum bin ich selber als "macom" registiert... der admin account in phpMyChat heist auch "macom" ich denke soweit ist auch richtig... den für mich alleine funktioniert das auch ganz gut... so jetzt soll aber der forums co admin auch bei eintritt in den chat den status admin haben... und hier fangen die probleme an...

Ich habe auch schon via phpadmin auf der mysql datenbank im table "c_reg_users" einen zweiten account "Steven" mit gleichem passwort wie bei "macom" angelegt... dann komme ich aber selber nicht mehr rein?? Jetzt weis ich nicht mehr weiter...

[Stasik]

dis acoouns auf vb muessen lauten: macom und Steven


versuch ma



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



wenn es nicht klappt



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



aber das erste code mus gehen

[macom]

Ok, werd ich gleich mal testen...
Was ich jetzt aber immer noch nicht weis... brauche ich in der table "c_reg_users" einem zweiten Admin account für Steven? Wen ja, wie generiere ich dann ein passwort (wegen verschüsselung)?

Danke schon mal im voraus...

[Stasik]

du muss einfach maeinen user hinfuegen und in tabelle unter "right" oder so was "admin" schreiben

Originally posted by macom
Ok, werd ich gleich mal testen...
Was ich jetzt aber immer noch nicht weis... brauche ich in der table "c_reg_users" einem zweiten Admin account für Steven? Wen ja, wie generiere ich dann ein passwort (wegen verschüsselung)?

Danke schon mal im voraus...

[macom]

Hab noch mal nachgesehen…

Laut Setuproutine von myphpchat darf nur ein Admin vorhanden sein… der steht dann in dem Table „c_reg_users“ also bleibt nur der Table „c_users“… hier darf ich aber keinen eintragen weil sonst der login in den Chat nicht mehr funktioniert (Username schon vergeben) ist mir auch klar, weil der Chat holt sich ja den User vom Board und trägt in dann in „c_users“ ein.

Wenn Steven eingeloggt ist kann ich mittels phpmyadmin im Table „c_users“ den Status auf admin oder mod setzen… diese Routine ist aber sehr unpraktisch und ich bin ja nicht immer zur selben zeit online. Ich hoffe du verstehst mich jetzt besser.
Oder mache ich doch noch etwas falsch :confused:

Ist es eventuell möglich einen Table vom Board so anzupassen das dass Board beim Login in den Chat gleich die richtigen Parameter (admin, mod) an den Table „c_users“ übergeben kann?

Von der logischen Seite könnte ich mir das schon vorstellen, aber ob dies umsetzbar ist bleibt die Frage?? Ich kenne mich mit mysql und PHP noch nicht so gut aus… Es wäre aber echt super, dann hätte gleich jeder Mod. vom Board auch den richtigen Status im Chat.

[macom]

Hab jetzt noch im Table "user" vom Board nachgesehen... dort gibt einen Eintrag "usergroupid" und natürlich auch den passenden Status dazu, leider nur als Nummer... 6 = Admin usw... kann man da net was machen?? Ich hoffe mal das Dir was Gutes dazu einfällt. ;)

[Stasik]

ahm.... ich bin kein php+mysql genie... :(((

also ich garantiere nix

nach


Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------


einfuegen


Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



nach


Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



einfuegen


Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------

[macom]

Danke erst mal... ich werde es heute nacht mal testen. Wäre echt cool wenn's funktionieren würde. Melde mich wieder...

[VirtueTech]

One thing I've noticed with this hack is that it does not integrate the phpMyChat profile with the forums profile. Any future for that?

[Stasik]

Yes, u can link the vbb profile on chat pages.... I think it will be in upgrade... :)

[macom]

Hallo nochmal,

habs jetzt probiert... jetzt kommt folgender Fehler:

Fatal error: Call to a member function on a non-object in index.lib.php3 on line 161



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



Hilfe....

[Stasik]

du mus alles mit require oder include vorher schieben

[macom]

?? Sorry aber das verstehe ich jetzt nicht ??

[Stasik]

try to replace

$PREMS = "admin";
mit

$DbLink->clean_results();
$PREMS = "admin";

[macom]

Hm, jetzt kommt folgender fehler...

Fatal error: Call to a member function on a non-object in index.lib.php3 on line 158



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



?? Sorry das ich dich eventuell schon nerve, aber ich habe wirklich fast keine ahnung vom PHP.

[Stasik]

aslo

move

require("./${ChatPath}config/config.lib.php3");
require("./${ChatPath}lib/release.lib.php3");
require("./${ChatPath}localization/languages.lib.php3");
require("./${ChatPath}localization/".$L."/localized.chat.php3");
require("./${ChatPath}lib/database/".C_DB_TYPE.".lib.php3");
require("./${ChatPath}lib/clean.lib.php3");
include("./${ChatPath}lib/get_IP.lib.php3");

das alles bevor das hack anfaengt

[mADmAX`]

I upgraded from 2.02 to 2.03 and now I get this when going to index.php3. Any clue? Database error: Invalid SQL: DELETE FROM c_messages WHERE m_time < 997295258
MySQL error: 1146 (Table 'dssmafif_+++++f.c_messages' doesn't exist)
Session halted.

[Stasik]

try to reinstal index.lib.php3 form archive and reenter the hack

[mADmAX`]

I figured it out, it seems that after I updated it, the tables that your hack creates was deleted. Works now... Thanks!

[Stasik]

np

[bitbender]

I've done the steps specified. I cannot seem to figure out what goes in the chat.php element (or is it a template?)

It seems that I cannot get anything other than a blank page when I select my chat button from the VB index.php....

the base install of chat was functional, and my problems came when I tried to integrate it, which I KNOW is a user error!!

I followed a thread http://vbulletin.com/forum/showthread.php?s=&threadid=21329&highlight=phpmychat which talks about a chat.php, but i'll be dogone'ed if I can find an example!

HELP!!! I see too many people who say "They got it", so I know I've done something stupid, or I'm just being dense!!!

Alert ---> Old Mainframer doesn't get this one!!!

[Stasik]

no... the thread is talking about the file index.lib.php3 in the /chat/lib/ derictory...

[bitbender]

ok, so is that where the link on the chat button points to ??

[Stasik]

no, the link poins to index.php3, but this file uses /lib/index.lib.php3

[bitbender]

Yes. The reason I asked was that I had tried that b4. When I point it(chat button) at /chat/index.php, I'm redirected back to the forum home page, as if the user had joined, and then left chat. I then tried index.lb.php3, but get a blank screen.

This is because of the hack that was added to index.php3 via the thread I mentioned before. It dicussed your hack and two other parts, which affected index.php in the VB forum directory, and
index.php3, and index.lib.php3, and exit.php3 for myphpchat.

thank you for your time. I will continue to analyze my setup. I am still thinking that I have the hack in VB INDEX.PHP misplaced. I tried to represent the variable ($numchatusers) on the home page via the forum_loggedinusers template, and got a blank field display for my efforts. That would indicate to me the code isn't being executed where it needs to.

I placed the hack at the very end of index.php in the VB forum directory. One of the other reasons I know I've something out or ordung is that the chat doesn't open in a seperate window, as the hack documentation indicated it should.

Help This old fool, please :confused:

[bitbender]

Forgot the link to the thread in question:

http://www.vbulletin.com/forum/showthread.php?s=&threadid=1344&highlight=Chat+Hack

Down the thread about 4 or 5 replies is a response by Tom. Thats the one I used. It incorporates your process, and some additional parts to get it all working.

[Stasik]

yes, byt it works fine without other parts, too

http://www.realwebhost.net/chat/

[bitbender]

"Dunka" for the reply stasik! :)

Update:

Ok, so I go back and study the whole thing again. I found that I had made some errors, so I restored all the files modified as a result of the hack (backups are great!!), and started again, 1 step at a time.

What my problem is now, is that I cannot figure out (I got PHP manual, 2) if the path specified in index.lib.php3 of phpmychat is absoulte or relative.

In reading thru all the pages in this post and other related threads(mentioned above) I saw where you assisted *skull* using what appeared to be absolute path names. Was this because his chat directory was at the same level as his forum directory ? I noticed you had him change some other options, as well...

Why is this a question? Because it is failing trying to retrieve global.php on the require("./global.php") statement after the chdir("\usr\prod\") statement in my version of index.lib.php3.

Can you advise?

[bitbender]

In my zeal to post a reply, I forgot the error response !

Fatal error: Failed opening required './global.php' (include_path='') in D:\????\????\phpchat\chat\lib\index.lib.php3 on line 91

I put the ???? in, as I don't publicize my directory structures.

The chat button on the home page links to \phpchat\chat\index.php3 as you had indicated in an earler post, and looking at chat_activity.php, also from an earlier reference in this thread.

[Stasik]

you have to write ADSOLUTE path.... un your case with NT system it should be something like this d:\wwwroot\bitbender\forum\ just try to ask your hoster

[bitbender]

Sir, I am the Web Hoster :) :) I build PC's, small networks, and work full time installing OS'es on mainframes througout US. The only help desk I have is me!!

Even at home, there is Domestic management to contend with !

thanks again for the reply! I'll keep at it!

I tried it w/o the D: designation, so let me go try wit it !!

[Stasik]

i`ve done it all to ;)

[bitbender]

I guess 15th time did the trick!!

Now functional. Sehr Gut!! <---- I hope I spelled this right!

Thanks again for your time, and patience!

You have to contend with domestic management, too ?? :p

[Stasik]

lol
good that it works (sehr gut was spelled rught)

hm.... ISS server has mahy bugs.... :(

[bitbender]

Ach so, but W2k Better than W98Se, or Linux, from my experience here.

I think I need to edit the config.php file. Insisting that user's register b4 entering chat room....arrr...not what I intended!!


Something else is still incorrect....Like a FIAT automobile,
FIAT = "Fix It Again, Tony!"

[Stasik]

u have forgotten freeBSD.... it is much stabiler then win2k or XP....

have u used setup.php3?

[muscles]

I tried the hack and it worked great.

Now do you have a clue as to how to get the privae rooms working again?


;)

[Stasik]

i`ve got it, will post with another stuff few dats later, i`m working on another thing now

[jarvis]

Okay, has anyone got this working with a non-php3 board? My provider does not host this version, and I would hate to have to reset up my vB?

Thanks!

[Stasik]

the hack can`t harm your vb system

[mister]

nice hack.

[Stasik]

thanx

[mister]

i have a question


when i do /exit or /quit, it takes me back to /chat/index.php3

is there a way to make it follow the $exiturl that i set in /chat/lib/index.lib.php3 ?


Thanks

[Stasik]

open
lib\commands\quit.cmd.php3
find :
window.parent.window.location = 'blabla';

replace:
window.parent.window.location = '<?php echo("$exiturl"); ?>';

it has to work

[PuntoZ3r0]

I've tried this hack...
and it doesn't work for me.. :(

phpMyChat (ver 14.5) is full functional..
but when I update the index.lib.php3..
it simply does.. NOTHING..
no error messages.. just NOTHING.. :( :(
I've already checked all that I've found...

so.. the problem is on index.lib.php3 (I suppose)

That's mine..
Is there anybody that can help me??

Thx

[Stasik]

also u are starting index.php3 and nothing?

[PuntoZ3r0]

I tried ev'rything!!
startin' with index.php3..
with phpMyChat.php3..
the result.. is.. NOTHING..
but if I use the original file.. (index.lib.php3).. it's all ok.. ..

I really don't know how to do that! :(

[Stasik]

show url plz ;)

[PuntoZ3r0]

url
http://www.pourquoipas.it
the forum is here..
http://www.pourquoipas.it/forum
Now I'm using a MultyChat.
(Just to have a chat..)
Oh..
It's in Italian.. (yeah.. translated..)

phpMyChat is HERE (http://www.pourquoipas.it/forum/chat)

thx

[Sarge]

// Registration of users
define("C_REQUIRE_REGISTER", '0');
define("C_EMAIL_PASWD", '0');

I changed my setting to that

phpMyChat 0.14.5
And vb 2.0 but I cannot login. I can login and change my profile but if I try to login under
http://www.dlrarmy.com/forums/chat/index.php3 it tells me wrong password

It alos wont allow new registrations

Anyone know?

[Sarge]

oh yeah this is from a fresh install

(never had it before)
and it was working fine till I added the changes

[Stasik]

Originally posted by Sarge
oh yeah this is from a fresh install

(never had it before)
and it was working fine till I added the changes

why have u changed it?

[Stasik]

Originally posted by PuntoZ3r0
url
http://www.pourquoipas.it
the forum is here..
http://www.pourquoipas.it/forum
Now I'm using a MultyChat.
(Just to have a chat..)
Oh..
It's in Italian.. (yeah.. translated..)

phpMyChat is HERE (http://www.pourquoipas.it/forum/chat)

thx

i can only suppost to try the english version, mayne there is a problem with language.... reallly dont know why

[Sarge]

Originally posted by Stasik


why have u changed it?

It worked fine earlier in the day until I added this hack

[Stasik]

i dont understand why it works fine for me and many other users

[gokeeper]

i am using phpmychat 14.5
after i edit the index.lib.php3 file
chat/index.php3 show 2 errors

Parse error: parse error in /usr/local/gokeeper/htdocs/chat/lib/index.lib.php3 on line 275

Fatal error: Call to undefined function: send_headers() in /usr/local/gokeeper/htdocs/chat/index.php3 on line 20

[Stasik]

can u post your line 275 here?

[gokeeper]

273 if($exit == "1"){header ("Location: $exiturl"); exit;}
274 }
275 }
276 }

[Stasik]

are u sure u have installed the hack correctly?

[gokeeper]

i think so...
just find and replace in 2 files
and modi the vb &chat location
without doing anything else...:(
ft..

can u give me a index.lib.php file include the hack?
thx

[Stasik]

u had to repace paths and $exitur there and rename it from txt

[jhkvi]

Have you figured out how to enable users to use the /join command? Or is this an impossible dream?:rolleyes:

[Stasik]

yes.... i have done it.... searching now for changes i have done :(

[jhkvi]

Great:cool:

I am awaitng your next reply.

[VirtueTech]

any updates? :)

[Stasik]

no time.. :( AND its hard to find changes now.... :( stay turned

[diavolo11]

I am so close--

Fatal error: Call to undefined function: layout() in /usr/local/www/htdocs/texasflashers/chat/index.php3 on line 43
-
What's that mean?

[Stasik]

no idea.... has u installed it ok_

[diavolo11]

i think so --I am getting this now
Fatal error: Cannot instantiate non-existent class: db in /usr/local/www/htdocs/texasflashers/chat/lib/index.lib.php3 on line 186

[Stasik]

post this line here....

make sure all mySQL-workings files are included

[diavolo11]

thanks for the quick replys, I will try this later on today, but befor you go..can you tell me a quick way to find this line? I don't wanna count to 200.

[Stasik]

search inet for editr with line names

[diavolo11]

here is the line:
$DbLink = new DB;

[Stasik]

are the mysql.php and another things connected correctly? had it worked before installing the hack?

[diavolo11]

yup here check it:
http://www.texasflashers.org/chat/index.php3

[H3NrY]

Where in index.php do I add the code??? I cant seem to get it working :(

[Stasik]

You should add code to /lib/index.lib.php3

[H3NrY]

I dont get it ... I want a new section under "Currently Active Users" ... How do I add it in Vbulletin's index.php??

[H3NrY]

I just want this integrated with "Currently Active Users" Its working but how to get it integrated?



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------

[diavolo11]

ok ok! I am closer--it seems to work fine except I still can't exit. I read and re-read everything, but I must be doing something wrong. It keeps redirecting me to the chat. and i set the
$exiturl = "http://www.texasflashers.org/forums/";
going nuts here.
Could you toss me a working exit.lib.php3?

thanks

[diavolo11]

nevermind, got it--
thanks and nice hack.

[Sukij]

Hi..

May be you can help.. I want to add the Current Chat Active User to the Forum Main Page, same as Who's Online. Is it possible to do that ? Can you help ?

Thanks

[Stasik]

there is a file smth like, "current _user.lib.php3"

[Sukij]

NO.. cannot find the file you mentioned.

[Stasik]

chat_activity.php3

[Sukij]

Thank, I found that file and I modify it to my need. Then I insert this line into forumhome_loggedinusers, but I don't know how to add that file into this statement. Can you please help.. Thanks

<normalfont color="{categoryfontcolor}"><b> [ Currently Chat Active Users</b></normalfont>
</a><normalfont color="{categoryfontcolor}"><b>: ] </b>

[Stasik]

u need to edit index.php

[Sukij]

How ? Can you help ?

[Stasik]

have no time, just put all from that file into index.php and use variables in templates

[Sukij]

Thanks i will try

[Sukij]

Uh.. beyond my ability.. finally give up.

If you have some free time, please consider this modification.

Thanks

[dbdbdbdb]

Hi Stasik,

first, thanks for this hack! :) I hope I'll be able to give something back to the community of vbhackers.

And here is my question:

I don't get it working. I can't get rid of the "no".

What I did:

First I installed the chat in a second database, so now i use the same as vbulletin.

I've set "Registration of users" to:
define("C_REQUIRE_REGISTER", '0');
define("C_EMAIL_PASWD", '0');

I've got clean tables. Just myself in "c_reg_users" with the same password and the same username as in my forum.

In index.lib.php3 I configured:

chdir("/homepages/htdocs/forum/");
require("./global.php4");
chdir("/homepages/htdocs/chat/");

I cleaned all my cookies, reloged in again and again, but I can't get rid of the "no". Why?

Please help. I've been searching for ages... ;)

dbdb

Ps: I am able to login admin.php3, but there are no rooms listed (to clean up).

PS: I had phpmychat working before, but did a clean install.

[dbdbdbdb]

Good Morning!

Does anybody have a clue? Some of you got it up and running, but you do not read this thread i guess... : domage.

dbdbdbdb

[Crinos]

Have you tried doing this?
Q: I`m getting "no" every time.
A: You need to upgrade a cookie option in your VB control panel. Write under: Options->Change Options->[HTTP Headers and output]->Cookie Domain your domainname ONLY (blabla.com).

[Crinos]

Btw, to anyone who is using phpyMyChat, is there any way to change the default chat color from black? which CSS or php file should I change?

I wanna use it with the main frame on a black background, which unfortunately makes the text invisible coz it defaults to black... Thanks in advance...

[dbdbdbdb]

Originally posted by Crinos
Have you tried doing this?


Thanks for your reply!
I did cookie the server and not the forum.

Does anybody got another idea? Thanks.

dbdbdbdb

[pgowder]

I'm very interested in this hack. However, I've heard that it is very server intensive.

How is everyone's experience with it?

thanks

[pgowder]

Well I'm trying to get it to work now.

Here is the error I'm getting:



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



Any ideas?

thanks

[webhost]

look at those files and post those lines here for us to see.

[pgowder]

Here is line 66:

if($Ver == ""){print "

[pgowder]

Here is the other section:

// Both values are boolean. See explanations in 'index.lib.php3' file.
send_headers(1,1);

[dbdbdbdb]

Hi Webhost!

Do have an idea concerning my "no-problem"? Please have look at my post one page back...

Thank you...

[humble]

I've done ALOT of custom work on this hack so far, and if anyone is willing to help me @

http://www.vbulletin.org/forum/showthread.php?s=&threadid=32450

I'd be much appreciative.

[pgowder]

Webhost, any ideas on my problems?

thanks

[webhost]

I never recieved your files pgowder

[pgowder]

Just sent them. Let me know if you don't get them!

[Stasik]

Originally posted by Crinos
Btw, to anyone who is using phpyMyChat, is there any way to change the default chat color from black? which CSS or php file should I change?

I wanna use it with the main frame on a black background, which unfortunately makes the text invisible coz it defaults to black... Thanks in advance...

there is a file: config/style.css.php3

search for:


Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------


you can replace color in color: #000000;

[Stasik]

Originally posted by dbdbdbdb
Hi Stasik,

first, thanks for this hack! :) I hope I'll be able to give something back to the community of vbhackers.

And here is my question:

I don't get it working. I can't get rid of the "no".

What I did:

First I installed the chat in a second database, so now i use the same as vbulletin.

I've set "Registration of users" to:
define("C_REQUIRE_REGISTER", '0');
define("C_EMAIL_PASWD", '0');

I've got clean tables. Just myself in "c_reg_users" with the same password and the same username as in my forum.

In index.lib.php3 I configured:

chdir("/homepages/htdocs/forum/");
require("./global.php4");
chdir("/homepages/htdocs/chat/");

I cleaned all my cookies, reloged in again and again, but I can't get rid of the "no". Why?

Please help. I've been searching for ages... ;)

dbdb

Ps: I am able to login admin.php3, but there are no rooms listed (to clean up).

PS: I had phpmychat working before, but did a clean install.

First.. make sure, cookies can work on your chat domain (better you use same domain name as forum)
Second: make sure vb saves cookies....

[pgowder]

What type of admin functions can be done in this chat room?

Can moderators ban users? Edit things?

When I go into admin.php3, should all my users show up there as registered users? It is empty?

thanksa

[webhost]

click the "?' in chat

[pgowder]

Thanks, I see all the commands now.

What about the users, should they show up?

[webhost]

As far as users that have logged into your forum then when they go into the chat room then yes there name should should show up in chat like ours did when we were there. I don't believe however that the user names will showup in the chat admin panel, Don't see how they can because they do not show up in the chat user table anymore because you are now using the forum user table.

[pgowder]

Ok, that makes sense!

Thanks!

[pgowder]

I'm testing out the chat room now. I just tried to kick someone out.

But it said I wan't a moderator. Does it not pick up the moderators from vb?

[Stasik]

You have to put you nickt to the hack part

[pgowder]

Can you explain that? I don't understand?

[pgowder]

Ok, I replaced nickname with my username on vb. But I still can't make announcements etc.

???

[Stasik]

Sure.....

[pgowder]

???

[pgowder]

Does anyone have any ideas about the moderator functions not working?

Does it work for everyone else?

[obs]

i had this exact same problem too. how did you fix it?

Originally posted by pgowder
Well I'm trying to get it to work now.

Here is the error I'm getting:



Code:
---------------
Code is only visible to licensed users, and only when logged into the forums.
---------------



Any ideas?

thanks

[grb123]

My chat index.php3 page comes up blank when I add the first bit of the hack to index.lib.php3. If I remove the hack I get the login screen.

Ive attached the index.lib.php3 bit that's the problem (although I've renamed them to php it doesn't really matter as the error was the same when it was php3)

//a VBB integration hack by Stasik (stasik@t-online.de)
//v0.1
//(C)2001

$exiturl = "http://www.blabla.com"; // the url the user will be redirected exiting the chat

if($Ver == ""){print "
<HTML>
<SCRIPT TYPE=\"text/javascript\" LANGUAGE=\"javascript\">
<!--
var NS4 = (document.layers) ? 1 : 0;
var IE4 = ((document.all) && (parseInt(navigator.appVersion)>=4)) ? 1 : 0;
var ver4 = (NS4 || IE4) ? \"H\" : \"L\";
function defineVerField()
{
if (document.images && ver4 == 'L')
document.forms['Params'].elements['Ver'].value = 'M'; // js1.1 enabled browser
else document.forms['Params'].elements['Ver'].value = ver4;
}
-->
</SCRIPT>
<FORM ACTION=\"index.php\" METHOD=\"POST\" AUTOCOMPLETE=\"OFF\" NAME=\"Params\">
<INPUT TYPE=\"hidden\" NAME=\"Ver\" VALUE=\"L\">
</FORM>
<SCRIPT TYPE=\"text/javascript\" LANGUAGE=\"javascript\">
defineVerField();
document.forms.Params.submit();
</SCRIPT>
</HTML>
"; exit;}

chdir("/home/sites/site2/web/chat");
require("./global.php");
chdir("/home/sites/site2/web/chat/livechat");

if ($bbuserid == 0)
{
print "no"; //Message if the user has no cookie
exit;
}
else
{
if ($bbusername == "" || (isset($bbusername))==0)
{
$getusername=$DB_site->query_first("SELECT username FROM user WHERE userid=$bbuserid");
$username=$getusername[username];
$bbusername = $username;
}
else
{
$username = $bbusername;
} }

$U = $username;

$pat = "[[:space:]]";
$repl = "";
$U = ereg_replace($pat,$repl,$U);
$pat = ',';
$U = ereg_replace($pat,$repl,$U);
stripslashes($U);

$N = 20;
$D = 10;
$Form_Send = 1;

//Replace admin with your administration nick
if($U != "chatadmin")
{
$PASSWORD="1";
}

[Stasik]

can`t see it :(

[grb123]

Wow, you're fast!!

It didn't attach for some reason so I pasted it in now.

Thanks.

[pgowder]

Hello, can someone help.

[SneakyDave]

OK, here is what I've done. I've created a separate script for phpMyChat and vBulletin integration. It includes the hacks discussed here, and should work well for more people. I've made a few small enhancements, and added a few installation notes.

Some points of interest.
1) These files are all .php extensions.
2) No chat registration exists, including administration. You can create rooms in the setup, but that's it. No private rooms, no banning, etc. That's because the setup that works for me has the "no registration" option on. So if you can handle that, this should work.
3) I can answer the questions I can, but not detailed specifics on phpMyChat or vBulletin.
4) I don't have CVS available for any fixes or changes, if I update anything, I'll post it here.
5) This is of course, an unofficial release of the phpMyChat script, but I've left all documentation intact.

Thanks to phpProbe, Tom, phpMyChat, and vBulletin for great hacks and products.

You can download the zip file here:
http://www.auctioncrotch.com/download.php?op=viewdownload&cid=1

[Bally]

works perfect for me!
THX!
:)

[Gholsie]

One of my users keeps getting this error. It's kind of odd because only one person has this issue. Can someone help me figure this out? Here's his error: (2ManyZ's is his username)

Database error: Invalid SQL: SELECT room FROM c_users WHERE username='2ManyZ's' LIMIT1

MY SQL error: 1064 ( You have an error in your SQL suntax near "s" LIMIT 1' at line 1) Session halted.


UPDATE: I was just thinking about this, could this be a result of an apostrophe (') in his username?

[Bally]

Look at the USer name!

It´s: 2ManyZ's

rename the user to 2ManyZs and it will work fine!

Best regards!

[Gholsie]

Thanks....

[saab340]

I got the chat running, but now I need to know how to integrate the Who's chatting to show next to my who's online...

How do I do that?

[Gholsie]

I'd even like to add a block to my phpportals front page that shows who is in the chat room. Anyone know how to do this?

[Stasik]

there is a script coming with phpmychat...

[KevinG]

Originally posted by Stasik
there is a script coming with phpmychat...

What do you mean by that?
Are you saying a new phpmychat is coming out now?

[Stasik]

there is a script in phpmychat zip which allows you to see users chatting at the moment

[Gholsie]

Yep, you're right. The file is called chat_activity.php3. It's included with the distribution of phpMyChat. The file is NOT inside your chat directory, but, one back.

It's a cool little program. But, I want to make it work with my phpportals mod in a block. Maybe I'll try to take the code and copy it to a block.

-- Mike
:stoned:

[MomofThree]

I hope someone can help me and hope you have some patience too, because I have only tried to do simple hacks and having problems with this one.

I did exactly what the instructions said and I am getting this error:

Parse error: parse error in /lib/index.lib.php3 on line 741

Fatal error: Call to undefined function: send_headers() in /home/www/theparentclub/tpcchat/index.php3 on line 20


http://www.theparentclub.com/tpcchat/index.php3

Now here's my other question. How do I exactly make the chat show up within my boards? How do I integreate it seemlessly?

Hope someone can help guide me on how to do this.

Thank you so much.