[mkdevo]

i'm looking for a hack that will display something like 'Supporting Member' with an icon under a user's name, in order to tell who has donated to the site.

i couldn't find anything here, but i've seen this up and running. see here.

example in the attachment. it also shows up as a line in a user's profile.

[Colin F]

Originally Posted by mkdevo

i'm looking for a hack that will display something like 'Supporting Member' with an icon under a user's name, in order to tell who has donated to the site.

i couldn't find anything here, but i've seen this up and running. see here.

example in the attachment. it also shows up as a line in a user's profile.

This could be done, for example, with an additional usergroup.

Then, add a template conditional to the postbit, saying something like:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

[mkdevo]

Originally Posted by Colin F

This could be done, for example, with an additional usergroup.

Then, add a template conditional to the postbit, saying something like:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

Colin,

thanks for the tip. sounds good, but when i tried to implement it, it showed up on all posts. i added a 'Supporting Member' usergroup, and here's the code i used:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

any ideas as to what i've done wrong?

thanks again!

[Colin F]

Originally Posted by mkdevo

Colin,

thanks for the tip. sounds good, but when i tried to implement it, it showed up on all posts. i added a 'Supporting Member' usergroup, and here's the code i used:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

any ideas as to what i've done wrong?

thanks again!

You almost got it.

You'll have to exchange the x not with Supporting Member, but with the usergroupid of that usergroup. It would then look something like: "$post[usergroupid] == 9"

[mkdevo]

Colin,

Just changed it to reflect the usergroupid, and i'm getting the same results.

Are there any other changes I nees to make?

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

[mkdevo]

colin (or anyone else),

this code is still not working for me - showing up for every member when i put it in.

any ideas on how to make it work? (btw, i'm running 2.3.5)

thanks..

[Andreas]

Well Colin, this is the vB2 code modification section
vB 2.x does not support <if ...>

If you want smth. similar for vB 2.x take a look at http://www.vbulletin.org/forum/showthread.php?t=43325

Btw: I'd recommend to upgrade to vB3 - the code is much better.

[mkdevo]

Originally Posted by KirbyDE

Btw: I'd recommend to upgrade to vB3 - the code is much better.

yeah, i plan on it.. actually just copied my db so i can start testing vb3 out a little bit. hope to have it going within a few months..

thanks for the tip. thought i was going nuts!

[Colin F]

Sorry about that mkdevo.

I generally go over the new posts link, and that doesn't show me it's vB2.

Once you've upgraded to vB3, the above code should work though