PDA

View Full Version : Welcome Panel Template Rewrite v2.1


Pages : [1] 2

King Kovifor
13 Nov 2005, 01:22
Introduction:

I found Zero Tolerence's Welcome Panel's (http://www.vbulletin.org/forum/showthread.php?t=83124) template dull, and it had a lot of mistakes on my computer, and it shows up on a lot of the sites I visit that have it. It annoyed me so I threw together my own Template for his hack. This is it. I've called it Welcome Panel Template Rewrite, as that's exactly what it is. It's about to go into it's next version, so be on the look out.

This hack will not work if...

You must install this (http://www.vbulletin.org/forum/showthread.php?t=83124) hack (Zero Tolerence's Welcome Panel) before my hack will work. It requires the plugins. Just don't follow the installation instructions for the template.

Installing:

All you have to do to install this hack is upload the .xml file that's attached to your Products Manager and it'll install the template and phrases.

Note: Be sure to chose the correct .xml! It is reccomended that you chose either v1.3 (location within zip: back releases/v1.x) or v2.1.1's XML file (main folder)!

v1.3 Features:
Displays New Posts
Avatar Display
Forum Stats
Fully Phrased
New Posts Link
Edit Profile Link
Edit Avatar Link
Most Active in.
Percent of Forum Posts
Posts Per Day
Number of Posts
Forum Stats
Collapsable

More Features will be added in v2.0. You can gain IMAGE links by PMing me.

v2.0 Features:
Displays the number of new posts.
It displays the user's avatar & links to the edit avatar page.
Displays your forum stats:
Posts
Threads
Members
The welcome panel is fully phrased.
Displays a link for new posts.
There is a link to edit your profile.
It shows the forum your most active in.
It displays the percent of your posts compared to the total forum posts.
It displays the users posts per day count.
It displays the users number of posts.
The welcome panel is collapsable if the user doesn't want it there.
Completely customizable through a setting group with 13 settings.
Displays users current time (in their time zone)!
Image or Textual links for New Posts, Daily Posts, and Edit Your Profile.
Displays the number of new Private Messages.
Displays the number of new Threads.
Customizable link for forum rules.
Customizable to the latest forum announcement (thread only).
Latest Announcment name is customizable through a setting.
There is an admin editable section for "useful links", HTML required.
Link to forum leaders. (uses vB default phrase so if you change it to something else the welcome panel also changes)
Link to Mark Forums Read. (uses vB default phrase so if you change it to something else the welcome panel also changes)
Link to the announcement forum.
The colors now alternate correctly on your welcome panel.
New! Show Version
New! Welcome Panel Style

Thanks to DaPro for Style Option #2!

Version 2.1.1 Addresses some bugs within the style.

Support:

I will give support in this thread.

Bugs:

Please report all bugs in this thread.

Special Thanks to...

Zero Tolerence - Zero told me how to add setting groups, settings, and everything with that sort.
lanc3lot - Thanks for making the buttons! Also for your great suggestions too!
GrendelKhan{TSU - For the fully phrased suggestion!
DaPro


Planned Features...
Top Poster (ETA: v2.2)
Your Thread Count (ETA: v2.2)
Customizable Favorite Forum Link: User Set (ETA: v2.2)

Planned Settings:
Default Welcome Panel (ETA: v2.2)
Font (ETA: v2.2)


Beta Testers:
lanc3lot
icemann

Screenshots Below.

PTO
13 Nov 2005, 01:47
Screenshot?

King Kovifor
13 Nov 2005, 01:49
OOPS. Added, thanks PTO!

rb290
13 Nov 2005, 04:34
thanks, pretty big difference

puertoblack2003
13 Nov 2005, 05:41
not bad looks cleaner****Installed****

Boofo
13 Nov 2005, 11:30
Please attach a text file with the instructions. ;)

loonytune15
13 Nov 2005, 14:51
I installed it but it dont loook right, problem with the last visit time, and the text is huge. reverted back to the original

kewl1uk
13 Nov 2005, 14:59
In VB 3.5.1 I don't have a forumhome_welcomepanel template. Any ideas?

Inferno Dragon
13 Nov 2005, 15:12
^ you need to install the welcome panel mod first! :)

kewl1uk
13 Nov 2005, 15:21
^ you need to install the welcome panel mod first! :)

Silly ol' me! Now all I have to do is find it. Search here I come. Thanks for the info :)

kewl1uk
13 Nov 2005, 15:50
*clicks install* Thank you

King Kovifor
13 Nov 2005, 15:58
Please attach a text file with the instructions. ;)

Will Do.

I installed it but it dont loook right, problem with the last visit time, and the text is huge. reverted back to the original

Will you do a screenshot for me? And Give me your template please.

gameslover
13 Nov 2005, 17:41
Is there a way to have it above the navbar like this panel : http://www.vbulletin.org/forum/showthread.php?t=83205 ?

It would be wonderful if it's possible :nervous:

Thank you :)

King Kovifor
13 Nov 2005, 17:43
Is there a way to have it above the navbar like this panel : http://www.vbulletin.org/forum/showthread.php?t=83205 ?

It would be wonderful if it's possible :nervous:

Thank you :)

DO you want it to REPLACE your navbar section? I'd have to work on it, so give me some time. ;)

Gizmo5h1t3
13 Nov 2005, 17:49
shows out of line on mine...

try this one??

<table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="$stylevar[cellspacing]" border="0" width="100%" align="center">
<tr>
<td class="tcat" colspan="3" align="center">
<a style="float:$stylevar[right]" href="#top" onclick="return toggle_collapse('forumhome_welcomepanel')"><img id="collapseimg_forumhome_welcomepanel" src="$stylevar[imgdir_button]/collapse_tcat$vbcollapse[collapseimg_welcome_panel].gif" alt="" border="0" /></a>
Welcome Back <a href='member.php?{$session[sessionurl]}u={$bbuserinfo['userid']}'>{$bbuserinfo['username']}</a>
</td>
</tr>
<tbody id="collapseobj_forumhome_welcomepanel" style="$vbcollapse[collapseobj_forumhome_welcomepanel]">
<tr>
<td class="alt1" align="center" width="1%">
<a href="profile.php?{$session[sessionurl]}do=editavatar">{$bbuserinfo['avatar_build']}</a>
</td>
<td width="50%" class="alt2" align="$stylevar[left]" valign="top">
Welcome back, {$bbuserinfo['username']}, there`s been <b>{$bbuserinfo['newposts']}</b> posts and <b>{$bbuserinfo['newthreads']}</b> threads since your last visit {$bbuserinfo['lastvisit']}<br />
<table width='80%' cellspacing='0' cellpadding='2' border='0' align='top'>
<tr>
<td width="100%" align="$stylevar[left]"><b>{$exec_lastposts}</b> Posts in 24 HRs - <b>{$bbuserinfo['pmunread']}</b> Unread PM`s</td>
</tr>
</table>
<hr size="1" style="color:$stylevar[tborder_bgcolor]" />
<div align='center'><a href="search.php?{$session[sessionurl]}do=getnew">New Posts</a> <a href="search.php?{$session[sessionurl]}do=getdaily">Posts in last 24HRS</a> <a href="profile.php?{$session[sessionurl]}do=editprofile">Profile Edit</div>
</td>
<td width="50%" class="alt2" align="$stylevar[left]" valign="top">
Your total posts: <b>{$bbuserinfo['posts']}</b> (<b>{$bbuserinfo['postpercent']}%</b> of the board total)<br />
<if condition="$bbuserinfo[active]">
Most active in: <a href="forumdisplay.php?{$session[sessionurl]}f={$bbuserinfo[active][0][forumid]}">{$bbuserinfo[active][0][title]}</a> <b>{$bbuserinfo[active][1]}</b> Posts<br />
<else />
You're most active in: <i>N/A</i><br />
</if>
<table width='100%' cellspacing='0' cellpadding='2' border='0' align='center'>
<tr>
<td width="50%" align="left">Average posts a day: <b>$bbuserinfo[postsperday]</b></td>
</tr>
</table>
<hr size="1" style="color:$stylevar[tborder_bgcolor]" />
<div align="center">Members: <b>{$numbermembers}</b> Threads: <b>{$totalthreads}</b> Posts: <b>{$totalposts}</b></div>
</td>
</tr>
</tbody>
</table>
<br />

King Kovifor
13 Nov 2005, 17:50
shows out of line on mine...

try this one??

<table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="$stylevar[cellspacing]" border="0" width="100%" align="center">
<tr>
<td class="tcat" colspan="3" align="center">
<a style="float:$stylevar[right]" href="#top" onclick="return toggle_collapse('forumhome_welcomepanel')"><img id="collapseimg_forumhome_welcomepanel" src="$stylevar[imgdir_button]/collapse_tcat$vbcollapse[collapseimg_welcome_panel].gif" alt="" border="0" /></a>
Welcome Back <a href='member.php?{$session[sessionurl]}u={$bbuserinfo['userid']}'>{$bbuserinfo['username']}</a>
</td>
</tr>
<tbody id="collapseobj_forumhome_welcomepanel" style="$vbcollapse[collapseobj_forumhome_welcomepanel]">
<tr>
<td class="alt1" align="center" width="1%">
<a href="profile.php?{$session[sessionurl]}do=editavatar">{$bbuserinfo['avatar_build']}</a>
</td>
<td width="50%" class="alt2" align="$stylevar[left]" valign="top">
Welcome back, {$bbuserinfo['username']}, there`s been <b>{$bbuserinfo['newposts']}</b> posts and <b>{$bbuserinfo['newthreads']}</b> threads since your last visit {$bbuserinfo['lastvisit']}<br />
<table width='80%' cellspacing='0' cellpadding='2' border='0' align='top'>
<tr>
<td width="100%" align="$stylevar[left]"><b>{$exec_lastposts}</b> Posts in 24 HRs - <b>{$bbuserinfo['pmunread']}</b> Unread PM`s</td>
</tr>
</table>
<hr size="1" style="color:$stylevar[tborder_bgcolor]" />
<div align='center'><a href="search.php?{$session[sessionurl]}do=getnew">New Posts</a> <a href="search.php?{$session[sessionurl]}do=getdaily">Posts in last 24HRS</a> <a href="profile.php?{$session[sessionurl]}do=editprofile">Profile Edit</div>
</td>
<td width="50%" class="alt2" align="$stylevar[left]" valign="top">
Your total posts: <b>{$bbuserinfo['posts']}</b> (<b>{$bbuserinfo['postpercent']}%</b> of the board total)<br />
<if condition="$bbuserinfo[active]">
Most active in: <a href="forumdisplay.php?{$session[sessionurl]}f={$bbuserinfo[active][0][forumid]}">{$bbuserinfo[active][0][title]}</a> <b>{$bbuserinfo[active][1]}</b> Posts<br />
<else />
You're most active in: <i>N/A</i><br />
</if>
<table width='100%' cellspacing='0' cellpadding='2' border='0' align='center'>
<tr>
<td width="50%" align="left">Average posts a day: <b>$bbuserinfo[postsperday]</b></td>
</tr>
</table>
<hr size="1" style="color:$stylevar[tborder_bgcolor]" />
<div align="center">Members: <b>{$numbermembers}</b> Threads: <b>{$totalthreads}</b> Posts: <b>{$totalposts}</b></div>
</td>
</tr>
</tbody>
</table>
<br />

You On 800 x 600?

Gizmo5h1t3
13 Nov 2005, 17:53
no, but others on my board might be....that way, the one i posted covers them all....

King Kovifor
13 Nov 2005, 17:55
Some of it seems to be a little unneded. I'll work on it though.

Gizmo5h1t3
13 Nov 2005, 18:13
Some of it seems to be a little unneded. I'll work on it though.

im a total n00b at this mate, most of it is ZT`s original code, with bits changed...thats all

gameslover
13 Nov 2005, 18:22
DO you want it to REPLACE your navbar section? I'd have to work on it, so give me some time. ;)
That's sound great but only on forumhome like the hack I show you in my last post if it is possible ?

If you want to work on it that would be very very cool :)

King Kovifor
13 Nov 2005, 18:30
That's sound great but only on forumhome like the hack I show you in my last post if it is possible ?

If you want to work on it that would be very very cool :)
Got ya. OK Will work on that.

King Kovifor
13 Nov 2005, 18:31
im a total n00b at this mate, most of it is ZT`s original code, with bits changed...thats all

Not A Lot. I've made a 1.1 update to make it "800 x 600" Friendly. :-)

gameslover
13 Nov 2005, 18:38
Got ya. OK Will work on that.
Thank you very much :)

King Kovifor
13 Nov 2005, 18:40
Thank you very much :)
YW, it may take longer than I expected.

gameslover
13 Nov 2005, 19:19
YW, it may take longer than I expected.
That's not a problem for me, take all the time you need :)

JimNY
13 Nov 2005, 20:32
Hi Everyone,

I am unable to locate the forumhome_welcome panel. I found the forumhome from the style manager. Where do you find the welcome panel?

Do I replace everything in the forumhome with the one written or do I find the welcome panel within the forumhome template?

Thanks

loonytune15
14 Nov 2005, 13:37
@ JimNY install this hack first:
http://www.vbulletin.org/forum/showthread.php?t=83124

@King Kovifor I've gone through the original code myself and changed it more to my own liking. I'll add in your code again and post a shot here in a min.

http://www.monster-designs.com/Files/welcome.jpg

King Kovifor
14 Nov 2005, 20:19
Is that your change? Pretty Nice, if that's mine, glad it worked out.

MThornback
14 Nov 2005, 22:54
Installed...

I also tweaked the template, changed the wording a bit so that the two lines actually line up :)

Great work on the rewrite!

King Kovifor
15 Nov 2005, 01:36
Thank You. FOR ALL BUG REPORTS, OR PROBLEMS PLEASE PLEASE USE OUR NEW BUG REPORT/HELP SYSTEM OVER AT VBRENEGADES:

http://www.vbrenegades.com/bugs.php?s=&do=list&vbug_statusid=24

loonytune15
15 Nov 2005, 01:55
No I've rewrote mine to look like this...
http://www.monster-designs.com/Files/welcome2.jpg

The one a few posts above is what your code looks like.

King Kovifor
15 Nov 2005, 02:00
Pretty Nice, I see the posts, I like it. Except I t hought the posts in the last 24 hour parts were pretty useless. May I suggest using my code for the name? It's not a link in mine.

loonytune15
15 Nov 2005, 02:18
I like the link, useful for when i mkae changes to the profiles i can get to mine to see if it works right. Thats just in my opinion.
I am looking at adding in a few other things to it, but i might have to look at the stats area as it will get to big otherwise.

King Kovifor
15 Nov 2005, 20:24
The link is to your profile, but whatever fits you is fine. :)

slvr ralliart
16 Nov 2005, 04:17
nice

thanks~

King Kovifor
16 Nov 2005, 20:13
YW. Wow this is totally the most popular hack of mine.

Snake
16 Nov 2005, 20:34
Just installed this hack. Well done!

King Kovifor
20 Nov 2005, 18:09
Your Not showing up as installed. :(

Dollah
20 Nov 2005, 23:49
thanx for this and the info

GrendelKhan{TSU
21 Nov 2005, 17:50
any chance of getting this fully phrased?? (kinda important for a welcome panel ;))

so pleease....
I will love you forever if you can make this FULLY PHRASED!!! I tried and failed :( :(


nice changes in any case :)

King Kovifor
21 Nov 2005, 23:26
Not Such a bad idea.

King Kovifor
22 Nov 2005, 00:20
IMPLEMENTED AND COMPLETE. Now, I'm just working on a file to add phrases. :) That might take a while. :(

Smartin
22 Nov 2005, 23:12
I have clicked on the "Install" link, and it shows as installed, but how do I create the welcome panel under the forumhome template? I really would like to have this on my board.

Smartin
22 Nov 2005, 23:41
to add to my last post: I just did the 3.5.1 upgrade. I have moved the "What's Going On" box to the top of the page. Can I replace the userinfo table with the code above?

Smartin
23 Nov 2005, 01:09
ok...got the welcomepanel made....and the xml file uploaded. Why am I not seeing the welcome panel on the main page? Do I have to modify the forumhome template?

Smartin
23 Nov 2005, 02:16
got it....didn't realize I had to enable plugins. <----n00b

King Kovifor
23 Nov 2005, 16:50
You need to install zero tolerences and I don't have an xml file yet.

King Kovifor
25 Nov 2005, 14:40
OK I got an xml file that SHOULD install phrases. I'll be updating the template today, if I still have it, if I don't (I just need access to the test vb again, it's gone all haywire with vB.com hackers into the license account and they've used our license and someone reported us as hackers and now we are under investigation and he took it down. :( SO no access for now.)

gameslover
25 Nov 2005, 17:02
Hello,

I have a problem, the % and the messages per day are not working. As exemple, for me, the % is always showing 20% et the posts par day are always at 0.00.

The worst is for any of my members, they have % like 12'000% or 2380% lol that's amazing, fun but very strange...

Is there a way to fix it ?

Thanks

King Kovifor
25 Nov 2005, 23:02
gameslover, I think your asking the wrong author. :D It's probably somethign todo with Zero Tolerence's part, try to reinstall the hack. That might work.

gameslover
25 Nov 2005, 23:23
gameslover, I think your asking the wrong author. :D It's probably somethign todo with Zero Tolerence's part, try to reinstall the hack. That might work.
Thanks you, but I have already tried to contact him without success... he seems to be very busy right now... I'll try to reinstall it, thanks you for the suggestion :)

King Kovifor
25 Nov 2005, 23:33
Your Welcome, just let me know if it works. :)

gameslover
26 Nov 2005, 11:04
I tried to reinstall it but unfortunately without success... it's very strange because the posts per day are working for my members but not for me lol...
I'll try to contact Zero Tolerance again hoping he will be less busy in some days...

King Kovifor
26 Nov 2005, 20:11
Can you send me your template please?

gameslover
26 Nov 2005, 23:17
Yes of course but it's the same that in your first post :)

<table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="$stylevar[cellspacing]" border="0" width="100%" align="center">
<tr>
<td class="tcat" colspan="3" align="center">
<a style="float:$stylevar[right]" href="#top" onclick="return toggle_collapse('forumhome_welcomepanel')"><img id="collapseimg_forumhome_welcomepanel" src="$stylevar[imgdir_button]/collapse_tcat$vbcollapse[collapseimg_welcome_panel].gif" alt="" border="0" /></a>
$vbphrase[wp_welcomeback] {$bbuserinfo['username']}!
</td>
</tr>
<tbody id="collapseobj_forumhome_welcomepanel" style="$vbcollapse[collapseobj_forumhome_welcomepanel]">
<tr>
<td class="alt1" align="center" width="1%">
<a href="profile.php?{$session[sessionurl]}do=editavatar">{$bbuserinfo['avatar_build']}</a>
</td>
<td width="50%" class="alt2" align="$stylevar[left]" valign="top">
$vbphrase[wp_welcomeback]! $vbphrase[wp_unread] <b>{$bbuserinfo['newposts']}</b> $vbphrase[wp_unread2] <b>{$bbuserinfo['newthreads']}</b> $vbphrase[wp_unread3] {$bbuserinfo['lastvisit']}. $vbphrase[wp_unread4] <b>{$bbuserinfo['pmunread']}</b> $vbphrase[wp_unread5]
<hr size="1" style="color:$stylevar[tborder_bgcolor]" />
<div align='center'><a href="search.php?{$session[sessionurl]}do=getnew"> $vbphrase[wp_view]</a> $vbphrase[wp_seperator] <a href="profile.php?{$session[sessionurl]}do=editprofile"> $vbphrase[wp_profile]</div>
</td>
<td width="50%" class="alt2" align="$stylevar[left]" valign="top">
$vbphrase[wp_total] <b>{$bbuserinfo['posts']}</b><br />
$vbphrase[wp_percent] <b>{$bbuserinfo['postpercent']}%</b> $vbphrase[wp_percent1]<br />
<b>$bbuserinfo[postsperday]</b> $vbphrase[wp_day]<br />
<if condition="$bbuserinfo[active]">
$vbphrase[wp_activity] <a href="forumdisplay.php?{$session[sessionurl]}f={$bbuserinfo[active][0][forumid]}">{$bbuserinfo[active][0][title]}</a> $vbphrase[wp_activity2] <b>{$bbuserinfo[active][1]}</b> $vbphrase[wp_activity3]<br />
<else />
$vbphrase[wp_activity] <i>N/A</i><br />
</if>
<hr size="1" style="color:$stylevar[tborder_bgcolor]" />
<div align="center">$vbphrase[wp_stats_members] <b>{$numbermembers}</b> $vbphrase[wp_seperator] $vbphrase[wp_stats_threads] <b>{$totalthreads}</b> $vbphrase[wp_seperator] $vbphrase[wp_stats_posts] <b>{$totalposts}</b></div>
</td>
</tr>
</tbody>
</table>
<br />

bonjurkes
27 Nov 2005, 11:59
king, the code that you give is not work for me. I mean only stats number displayed and there was no text at welcome panel.

i tried gizmo's code and its working fine now !

p.s: i am using 1024*768

King Kovifor
27 Nov 2005, 19:13
Can you both add screen Caps?

Gizmo's Code?

to: bonjurkes

did you install the product? That's what adds the phrases.

bonjurkes
28 Nov 2005, 01:48
yep i did it king. but phrases didnt shown after i changed the template with the second code it was all looking good :)

King Kovifor
28 Nov 2005, 01:50
ok try this:

uninstall my xml, than delete the template. AFTER adding the xml again, try the template again.

bonjurkes
28 Nov 2005, 01:53
king it is working fine now :)

like i said when i used second template codes its done..

King Kovifor
28 Nov 2005, 02:00
What' second code?

UPDATE: 1.3 ADDED, NEW INSTALL CODE WITH TEMPALTE ADDITION, TO UPGRADE PLEASE DELETE THE TEMPLATE, UNINSTALL THE PHRASES AND THAN READD THE PRODUCT. :) TOOK ME AWHILE TO PERFECT ME CODE. :)

rb290
28 Nov 2005, 03:05
where is 1.3 and whats different?

King Kovifor
28 Nov 2005, 15:30
Just an installer. And it's got all the phrases so they can't be deleted, like the templates. I forgot to add last night. SRRY!

Jedric
29 Nov 2005, 07:22
Is it just me or is the installer missing?

King Kovifor
29 Nov 2005, 20:14
Oops, must have clicked the wrong box editor.

lanc3lot
02 Dec 2005, 21:02
Oops, must have clicked the wrong box editor.

I have installed it but nothing happens:(

Note that i have 3.5.0 with some templates fixed, is that ok i think (it worked with all the other plugins/products/hacks i have installed...

Do i have to activate it somewhere?

King Kovifor
02 Dec 2005, 21:05
Did you install the Template Hack by Zero Tolerence?

lanc3lot
02 Dec 2005, 21:08
Exm, do i have to install another hack first and then this u mean?

King Kovifor
02 Dec 2005, 21:10
Yes, that's exactly what I mean. this is an addon. That's why it's a rewrite. :)

lanc3lot
02 Dec 2005, 21:17
Hm, sorry then:(

I guess u mean this one right: http://www.vbulletin.org/forum/showthread.php?s=&threadid=83124

So i just install that and then yours?

Also, write that in your first message, so other dont get confused :)

Thnx again

King Kovifor
02 Dec 2005, 21:20
Yeah will do, but that's the one. :)

lanc3lot
02 Dec 2005, 21:23
Question: Do i have to install also Zero's xml or just make the new template and then put your product?

King Kovifor
02 Dec 2005, 21:26
.xml is needed. There's plugins that are needed for this to work. SRRY!

lanc3lot
02 Dec 2005, 21:30
Ok, something last:)

Is there any other change i can see or just a rewrite?

Sorry to ask this, but i cant see a difference since i installed the product of yours with Zero Hack

King Kovifor
02 Dec 2005, 21:33
if you installed his, than installed mine right away without looking you won't notice it. :) or if you didn't install his template it's not noticeable. I was getting a bunch of ? as the serperators and the text was messed up. That's the point.

lanc3lot
02 Dec 2005, 21:41
Ok, thnx again:)

Installed

Ps

Is there any way i can change its phrases (need to translate them in Greek) ?

King Kovifor
02 Dec 2005, 21:43
Yeah. Go to your phrase manager -> edit all wp_x phrases with translations. :)

Zerachiel
03 Dec 2005, 23:22
Thanks, this is nice! *Install*

King Kovifor
03 Dec 2005, 23:24
This by far has been the most installed hack. :)

Viks
04 Dec 2005, 03:13
well, I installed the mod on my newly upgraded 3.5 but nothing happened.. didnt see any change in the templates nor in the Welcome Panel!! :ermm:

King Kovifor
04 Dec 2005, 17:41
Viks,

You have Zero Tolerences Modification installed? If so delete his template, than try it. There's just some differences in the way it's made. Or did you not look at the first one (some differences aren't noticable. Like the whole thing is phrased)

lanc3lot
04 Dec 2005, 20:26
King a question (or maybe a bug).

When a user see the panel, and lets say the forum has some Private Forums, it displays there also for the simple users, that for example there has been 5 news posts. But if he clicks there and the posts have been done in the private forums, he doesnt see anything..

So my main question or request is if we can exclude Private Forums from this counter there or even "show" them only to ppl that have access to these forums and the others see another number:)

Hope u understand what i mean:)

King Kovifor
04 Dec 2005, 20:30
I Know exactly what you mean. Except one problem, I just did the template hack. Why not ask Zero Tolerence?

lanc3lot
04 Dec 2005, 21:14
hm, because i thought u have rewritten everything and its most recent - active :) Dont know if Zero still continue support to this one

Anyway, if u cant fix it, i will try and find something from him, thnx again:)

King Kovifor
04 Dec 2005, 21:16
Nope I just did the template. :) And I can't do PHP.

lanc3lot
04 Dec 2005, 21:58
Ok thnx again for the support:)

King Kovifor
04 Dec 2005, 22:00
Your Welcome. If he can't do anything PM me. :)

icemann
05 Dec 2005, 00:51
I uninstalled Zero Tolerences template and imported this one......doesn't get easier.

Thank you so much KK........... *clicks install* :)

King Kovifor
05 Dec 2005, 01:01
wahoo 36! Yeah I just misread that post. I thought you said you uninstalled his hack. :P

Viks
05 Dec 2005, 01:40
Viks,

You have Zero Tolerences Modification installed? If so delete his template, than try it. There's just some differences in the way it's made. Or did you not look at the first one (some differences aren't noticable. Like the whole thing is phrased)

Hello King.
Yes, that worked well. The Hack is installed and looks pretty cool.

The forumshome shows to welcome panel.. Now, is there a way to remove the vbulletin default welcome panel contents and replace it with this?

Cheers,

v

SuperserverUK
05 Dec 2005, 11:58
Installed and working fine but I wish to change the font to match the rest of the forum.

Loonytune15 on a previous post http://www.vbulletin.org/forum/showthread.php?t=100672&page=3&pp=15 has done it well.

King Kovifor
07 Dec 2005, 02:42
Hello King.
Yes, that worked well. The Hack is installed and looks pretty cool.

The forumshome shows to welcome panel.. Now, is there a way to remove the vbulletin default welcome panel contents and replace it with this?

Cheers,

v

What do you mean default "welcome panel"?

Installed and working fine but I wish to change the font to match the rest of the forum.

Loonytune15 on a previous post http://www.vbulletin.org/forum/show...72&page=3&pp=15 has done it well.

Give me a while will you?

Dan
07 Dec 2005, 03:11
Nice template mod, I may use it so thanks ;)

/me clicks install.

King Kovifor
07 Dec 2005, 20:15
YW. You need ZT's modification first!

Viks
08 Dec 2005, 14:00
What do you mean default "welcome panel"?


The panel which is right above the Navbar, which shows
Welcome <username>,
You last visited: XXday at XX:XX

Mythotical
09 Dec 2005, 07:29
Viks, this will replace the default Welcome Panel with a new one. Now if you only want certain things to show, just post back here with that info and I will tell you what to remove.

King Kovifor has been busy lately so I will be checking this until he has a chance to post. I do apologise for the wait Viks and everyone.

Cheers
Myth

King Kovifor
09 Dec 2005, 15:22
Not busy, just computer deprived. :) LOL. Viks, give me a day or two and I'll tell you what code to remove. :) Also I might include some settings if I can get Mythotical to help me out. But, if there is any other modifications that you'd like, I got today and the weekend (snow day YAY!)

Right now the Test vB is down, so I can't do any modifications.

lanc3lot
09 Dec 2005, 15:35
I know that i must ask that in the Zero's Thread, but i ask that here too as i dont know if Zero continue support in his hack or maybe other fellow members can help me out :)

1) When a user see the panel, and lets say the forum has some Private Forums, it displays there also for the simple users, that for example there has been 5 news posts. But if he clicks there and the posts have been done in the private forums, he doesnt see anything..
So my main question or request is if we can exclude Private Forums from this counter there or even "show" them only to ppl that have access to these forums and the others see another number - Hope u understand what i mean

2) Is there anyway, we can make some special icons to be shown instead of the text links that are on the panel, i mean the "view new posts", "view posts in the last 24 hours" and "edit your profile" ?
Please if so, provide me a code so i can know what to do

3) Are u sure it has phrases in this hack? I can find to translate them:(

Thnx in advance as always :)

King Kovifor
09 Dec 2005, 15:38
#2 is easy. #1 a bit hard. If you got some buttons ready to go (I suck at them) I could add a phrase and get the code ready for you. (I'd would appreciate a "dafault" included set if you can make buttons.)

lanc3lot
09 Dec 2005, 15:42
/me going to photoshop to see what he has got:)

King Kovifor
09 Dec 2005, 15:45
Thanks. The vBR PHP coders aren't only so... I can't get the settings up for now.

lanc3lot
09 Dec 2005, 16:03
They are 50x50, (24 hours, edit profile, New posts)....

If the first is easy, tell me how plz:)

Hope u can make something:)

King Kovifor
09 Dec 2005, 18:09
Clock = Last 24 Hours
calander = new Posts
Tools = Edit Profile.

I'll see what I can do soone. Thanks a lot lanc3lot!

King Kovifor
09 Dec 2005, 20:58
For Now, I think I know the code of the top of my head (for now it's gotta be images or textual links). Please PM as it's not perfectly correct... yet.

lanc3lot
11 Dec 2005, 16:00
Heh nice features will be implemented Kovifor, we wait for them:)

Is the icons addon, will be added on v 2.0 as well or will u give the code somehow ?:)

King Kovifor
11 Dec 2005, 17:32
I'll give the icon codes to you in a version 1.4 as soon as my test vb is fixed.

EDIT:

Should be done ASAP.

EDIT 2: Now I just need the stupid FTP to work. But I'll start work on the settings or just play around with them.

Chadi
12 Dec 2005, 03:31
I installed this and the original, now I have two of the panels on my forum!

Why? Also, what happened to the navigational links ($vboptions[bbtitle] $navbits[breadcrumb]
for example)?

King Kovifor
12 Dec 2005, 22:16
chadi,

You've installed the hack and now you've got some problems... There are two templates as you probably didn't follow the install instructions correctly. Did you delete the original Welcome Panel template from Zero Tolerence? If not unistall mine real quick, delete his template than reinstall mine.

What do you mean by Navigational links?

bluecat
13 Dec 2005, 17:59
I apologize, but how the heck do I reduce the font size (I just upgraded to 3.5). Mine are huge. Thanks.

King Kovifor
13 Dec 2005, 21:16
What do you mean your font size is huge? Can I please have a screencap?

bluecat
13 Dec 2005, 21:52
I hate to use someone elses pic (as I uninstaled this for now), but the fonts show up "almost" as big as in this pic that someone posted earlier. This is probably something minor on my end, but I'm not sure how to change it.

King Kovifor
13 Dec 2005, 21:57
Just used the installer? I'm not sure what to tell you... Maybe try a font size tag. (Need to think...)

lanc3lot
14 Dec 2005, 00:58
King will u release the 1.4 soon plz ?:(

So we can have at least the icons part:P

King Kovifor
14 Dec 2005, 01:36
ok for now follow these quick instructions:

Add Phrase:

varname: wp_forumimagelink
text: http://www.yourdomain.com/root/directory/images/
Group: GLOBAL

Than in your template find:

<div align='center'><a href="search.php?{$session[sessionurl]}do=getnew"> $vbphrase[wp_view]</a> $vbphrase[wp_seperator] <a href="profile.php?{$session[sessionurl]}do=editprofile"> $vbphrase[wp_profile]</div>

Replace With:

<div align='center'><a href="search.php?{$session[sessionurl]}do=getnew"> $vbphrase[wp_forumimagelink]newposts.jpg</a> <a href="search.php?{$session[sessionurl]}do=getdaily"> $vbphrase[wp_forumimagelink]dailyposts.jpg</a> <a href="profile.php?{$session[sessionurl]}do=editprofile"> $vbphrase[wp_forumimagelink]editprofile.jpg</div>


That'll get the images for now. Not the 1.4 but soon it'll become that. :)

lanc3lot
14 Dec 2005, 01:57
Unfortunatelly, that didnt worked:(

See the example (attached picture) after i did the changes u mentioned

icemann
14 Dec 2005, 02:34
Unfortunatelly, that didnt worked:(

See the example (attached picture) after i did the changes u mentioned


I tried it too and got the same thing.

King Kovifor
14 Dec 2005, 20:50
Sorry Guys, I was in bed before I relized. I forgot some HTML Tags.
Find:

<div align='center'><a href="search.php?{$session[sessionurl]}do=getnew"> $vbphrase[wp_view]</a> $vbphrase[wp_seperator] <a href="profile.php?{$session[sessionurl]}do=editprofile"> $vbphrase[wp_profile]</div>



Replace it with this instead:

<div align='center'><a href="search.php?{$session[sessionurl]}do=getnew"> <img src="$vbphrase[wp_forumimagelink]newposts.png" alt="New Posts"></a><a href="search.php?{$session[sessionurl]}do=getdaily"><img src="$vbphrase[wp_forumimagelink]24hours.png" alt="Get Daily Posts"></a> <a href="profile.php?{$session[sessionurl]}do=editprofile"> <img src="$vbphrase[wp_forumimagelink]edityourprofile.png" alt="Edit Profile"></a></div>

Tell me if that works... I won't be on all day... <<

lanc3lot
14 Dec 2005, 21:00
It works as a charm:)

Thnx King again, waiting now for the version 2.0:)

King Kovifor
14 Dec 2005, 21:48
Going to work on it now lanc3lot! This may have a lot of bugs though! So bear with me in the 2.0 stages...

lanc3lot
15 Dec 2005, 01:26
heh, dont have any doubt mate, i will stick around :)

icemann
15 Dec 2005, 01:49
Awesome job KK, thanks bro. :)

Raptor
15 Dec 2005, 02:09
i dont seeem to have any change whatsoever from the original hack after upgrading

icemann
15 Dec 2005, 03:16
One thing to remember, if you saved lanc3lot's 3 pics then they were named as follows:

24hours.png
edityourprofile.png
newposts.png

But in the new code KK has the 3 listed as this:

dailyposts.jpg
editprofile.jpg
newposts.jpg

You will need to change the names in the code to suit your images along with the proper file extension.

lanc3lot
15 Dec 2005, 11:16
One thing to remember, if you saved lanc3lot's 3 pics then they were named as follows:

24hours.png
edityourprofile.png
newposts.png

But in the new code KK has the 3 listed as this:

dailyposts.jpg
editprofile.jpg
newposts.jpg

You will need to change the names in the code to suit your images along with the proper file extension.


Yes forgot to mention that here.
If u have also problem with Transparent PNG in IE browser, search this forum as there is an addon that fixes this problem and in general it much better to use png images in comparison with gifs or jpgs

:)

King Kovifor
15 Dec 2005, 22:10
I didn't save hers... Yes. LOL. I'll change it!

King Kovifor
16 Dec 2005, 01:59
v2.0 Beta Tester Wanted:

I am looking for 1 more person to become a beta tester. Someone willing to update and install, unreleased versions, throughout beta testing. They should be able to spot bugs. You Are NOT allowed, or supposed to change any code. You can suggest things though. To apply please PM me!

icemann
17 Dec 2005, 00:37
Here's them images KK.


or sent your email addy in next PM bro. ;)

King Kovifor
17 Dec 2005, 00:38
oops srry. send them to: doglover3049@gmail.com

It won't save from here...

icemann
17 Dec 2005, 00:56
You got mail KK. ;)

King Kovifor
17 Dec 2005, 01:00
So do you. Thanks so much!

zamalekfanz
21 Dec 2005, 01:25
I wanted to translate the Phrases but I could not
where can I find them to do so
I used the Phrase manager from the admin control panel
does not work

thanks

Snatch
21 Dec 2005, 11:13
how can I make the Info
Welcome Back! There have been 11 posts and 5 threads
make klickable. So thaht the user becomes all new theads and all new posts


Greetz
Snatch

King Kovifor
21 Dec 2005, 16:46
Snatch,

It's under neith it.

Zamalekfanz,

It's under your ACP -> Phrase Manager -> Global Phrases -> wp_x -> edit than there should be boxes for different languages. :)

bashy
24 Dec 2005, 20:14
Cheers for the PM KK

I have installed it for now..
I have setup a POLL to see what the mebers think to it!

Regards

Bashy

King Kovifor
24 Dec 2005, 20:16
YW,

Did you REINSTALL the original hack? That's a neccesity!

KK

bashy
24 Dec 2005, 20:36
Yes m8 i did thanks :)

Firestar.chkn
27 Dec 2005, 23:30
Hi King,

Awesome Hack. Thanks :) Installed.

Just a question, though. Someone else also asked about it, but I cannot quite make out your answer. Sorry :(

Currently, on my site, I have the forum logo, then the nav bar with the default welcome box above it to the right, and then your welcome panel below the navbar. Is there any way to get your welcome panel to replace the sectio directly above the navbar? The section where the default welcome box is to the right?

I attach a screenshot of what I'm talking about. Also, another hack on this forum has almost exactly what I'm looking for, but I like your hack more. This hack has the welcome panel in the right place, though.

Thanks for the help and a great hack.

Cheers
Firestar

King Kovifor
27 Dec 2005, 23:34
It's easy... But the login for would be gone....

Firestar.chkn
27 Dec 2005, 23:36
Hmmm, I see. No way to fix that? :( Cause that would be just the ultimate then.

AquilaEagle
27 Dec 2005, 23:45
got it thanks :)

King Kovifor
28 Dec 2005, 20:04
I'd experiment except my test vB isn't up.

Gizmo5h1t3
30 Dec 2005, 17:13
http://www.vbhackers.com/forum/showthread.php?t=2505

looks like someones nicking stuf off here, and posting it as theirs??

hope not....

King Kovifor
31 Dec 2005, 17:58
It's the same screen shot.

Lpspider
31 Dec 2005, 18:17
I installed the previous mod as you said I should (only for one style) ... then I installed/added this. However, the old style still has the old mod, whereas all other styles have this new version. How can I fix this?

Also, is there any way to add this to the footer of the page instead of the top?

Thanks.

Lpspider
31 Dec 2005, 18:21
Also, I disabled it... yet it still appears? *confused*

hotwheels
31 Dec 2005, 20:11
Nice hack man........ Hotwheels clicks *installs*

King Kovifor
31 Dec 2005, 23:01
What do you mean you disabled it? and It's because you didn't delete the template from Zero Tolerence. Do that and it'll read my template on the first style.

Lpspider
01 Jan 2006, 00:30
Well, if you go to "install products" there's a drop-down menu that says "edit, delete, export, disable, etc." that's what I meant by disable.

Got it now though - thank you. Nice mod!

King Kovifor
03 Jan 2006, 20:35
I don't think that's going to do anything... it shouldn't affect the showing of it.

Firestar.chkn
05 Jan 2006, 22:52
Hi King Kovifor,

Any news on moving the welcome box into the existing welcome box's space just above where it currently is? Taking up the whole box, not just the bit on the right as it is by default?

Thanks for any help.
Firestar

King Kovifor
05 Jan 2006, 23:48
Firestar.chkn... I haven't been able to try it try it yet... I don't have a testvb.

Firestar.chkn
06 Jan 2006, 14:21
alright, just thought I'd ask. No pressure :D

Thanks again
Firestar

King Kovifor
07 Jan 2006, 02:12
alright, just thought I'd ask. No pressure :D

Thanks again
Firestar

No Pressure Taken...

GamerJunk.net
07 Jan 2006, 11:26
I don't see a big difference? But I think I will install yours when you add teh new features in v.2

Snake
14 Jan 2006, 13:10
Thanks for the hack. Is there an update on this so far?

King Kovifor
14 Jan 2006, 16:10
Nope. Not Yet.

King Kovifor
16 Jan 2006, 22:19
Update on v2.0:

I've figured out the correct IF Code so now my settings are working... My To-Do list is pretty short:

Admin Links
Latest Announcement
Default Welcome Panel Show/Don't Show

There is a void setting right now, but hopefully I can fix the conditional to work... So I'd say I'm 50% Done.

S@NL - BlackBik
16 Jan 2006, 23:59
Thanks King :)
I'll monitor this thread.

King Kovifor
17 Jan 2006, 00:02
yw

I just ran into a snag with the development.

Snake
17 Jan 2006, 18:22
Thanks for the lil update!

King Kovifor
21 Jan 2006, 16:08
I may have to restart. << The testvb isn't showing up and I didn't download the xml when I had the time...

King Kovifor
23 Jan 2006, 00:55
*Restarting*

Snake
23 Jan 2006, 09:42
Kirby, could you add a couple of features please?

-User's Current Time
-Total Posts In Last 24 Hours

S@NL - BlackBik
26 Jan 2006, 21:01
I apologize, but how the heck do I reduce the font size (I just upgraded to 3.5). Mine are huge. Thanks.

Just put <div class="smallfont"> </div> around the textblocs :)

King Kovifor
28 Jan 2006, 15:08
Kirby, could you add a couple of features please?

-User's Current Time
-Total Posts In Last 24 Hours
Current time is being added, but a little while later...

Snake
28 Jan 2006, 15:25
Alright, glad to hear that... :)

King Kovifor
28 Jan 2006, 21:03
Alright, glad to hear that... :)
It's been implemented into Beta 2, which was sent to beta testers. Working on Beta 3 now. :)

icemann
28 Jan 2006, 22:26
And let me tell you that so far I like the new features. :)

King Kovifor
29 Jan 2006, 17:04
And let me tell you that so far I like the new features. :)
Beta 3 is on the fast track too. LOL. Any bugs?

icemann
29 Jan 2006, 18:04
Beta 3 is on the fast track too. LOL. Any bugs?


As far as I can see beta 2 is fine bro.

I'm using it on my live site and everything shows up, the rules link works, and no errors anywheres. :)

King Kovifor
29 Jan 2006, 18:05
If you've got an IM (any) can you please tell me as it's easier than e-mailing stuff? And I think beta three is ready.

icemann
29 Jan 2006, 18:06
Yahoo only bud and it's:

freeze518

King Kovifor
29 Jan 2006, 18:07
added.

Snake
01 Feb 2006, 16:47
Hey no updates to announce so far? :p

CrazyShooter
03 Feb 2006, 15:52
I dont understand what to do.. I have installed the one but what do i do with this xml that i just downloaded

King Kovifor
09 Feb 2006, 23:50
No, lost the forum again. I have it though. << Hopefully know the vb will want to work...

CrazyShooter, delete his template in acp -> Style manager. Than upload the .xml file into the products manager -> acp -> products. Than your set.

wizardan
01 Mar 2006, 15:52
Seems to be working without any flaws.
Great hack.
Installed.

King Kovifor
01 Mar 2006, 20:12
Three more people for 100! YES!

Firestar.chkn
07 Mar 2006, 15:01
Hey King,

Any news on this (http://www.vbulletin.org/forum/showpost.php?p=858087&postcount=137) request?

King Kovifor
12 Mar 2006, 00:49
Not yet, my original design for the first freakin' v2 had to be scratched because the boxes messed up...

Oddjob
18 Mar 2006, 18:30
does this work on 3.5.4?

King Kovifor
18 Mar 2006, 18:31
Yep. Just install the other hack first!

EDIT:
RC1 will be available 1 week after beta testers receive beta 3, as it includes all features planned for version 2.0! This is if no bugs are found.

hotwheels
20 Mar 2006, 21:30
Hey king? What was wrong with the other set up? I have had this running on my 3.5.4 since it came out and i updated from 3.5.2......

King Kovifor
20 Mar 2006, 21:32
What do you mean the other set up?

hotwheels
20 Mar 2006, 21:35
I guess v1.3

King Kovifor
22 Mar 2006, 22:21
I think he's actually got the ORIGINAL template installed...

Muderman24
25 Mar 2006, 00:01
How can I add a link next to the new post link, to show all new post in the last 24hrs?

King Kovifor
25 Mar 2006, 00:05
Version #? And you want 24 hours? Let's think about that...

$vbphrase[wp_seperator] <a href="http://www.vbrenegades.com/search.php?do=getdaily">Get Daily Post

King Kovifor
02 Apr 2006, 17:29
RC1 Release. :)

puertoblack2003
02 Apr 2006, 18:09
RC1 Release. :)


is there something else i'm missing? i upload the product as an upgrade and did required mods but is not showing up.

King Kovifor
02 Apr 2006, 18:14
It may have the default set to off in the options so go to your vBOptions -> Welcome Panel Template Rewrite -> Turn On

puertoblack2003
02 Apr 2006, 18:25
It may have the default set to off in the options so go to your vBOptions -> Welcome Panel Template Rewrite -> Turn On

yes , i tried that and still nothing...i know i have the old version still install but not through product can that be the issue? because i had disabled it thinking it was that but still same results

King Kovifor
02 Apr 2006, 18:30
Ok try this...

Delete both products, Zero Tolerence's template, and reupload the RC1 .xml file.

puertoblack2003
02 Apr 2006, 18:35
Ok try this...

Delete both products, Zero Tolerence's template, and reupload the RC1 .xml file.

yes that what i'm doing now...i'll keep you updated.

puertoblack2003
02 Apr 2006, 18:43
Ok try this...

Delete both products, Zero Tolerence's template, and reupload the RC1 .xml file.

wow....shhh.that was work...with patience and reading:confused: ...i got it i had to delete everything even the templates ok then i reup the updated version your hack and had to reupload teh plugin great happy know...lol ..now how can i remove that Welcome Panel Template Rewrite: v2.0 Release Candidate 1
want to keep it clean...unless something differs:D

King Kovifor
02 Apr 2006, 19:04
Well, it's there to help support, but it's in the template. It'll be this code:

<small><small>$vbphrase[wp_version]</small></small>

Remove it, but remember the version you've got installed as it'll be better for support.

puertoblack2003
02 Apr 2006, 19:36
Well, it's there to help support, but it's in the template. It'll be this code:

<small><small>$vbphrase[wp_version]</small></small>

Remove it, but remember the version you've got installed as it'll be better for support.

yes, i will i'll look at info in the product import thanks ...UPDATED...

King Kovifor
04 Apr 2006, 01:03
So, anybody play around with this yet?

DaPro
20 Apr 2006, 16:11
I have, some gripes with this re-write.

1. The border around the images in the template should be set to border="0"
2. You have to go into the vBOptions then into the Welcome Panel Admin Panel and save the settings first before they take effect, they should take effect after installation.
3. I would like to see a link to the Private Messages panel on this thing with some quick stats on the space available in your inbox.

I made some changes to the template myself, so take a look if you want.

http://forums.otakutalk.com

King Kovifor
21 Apr 2006, 00:47
I have, some gripes with this re-write.

1. The border around the images in the template should be set to border="0"
2. You have to go into the vBOptions then into the Welcome Panel Admin Panel and save the settings first before they take effect, they should take effect after installation.
3. I would like to see a link to the Private Messages panel on this thing with some quick stats on the space available in your inbox.

I made some changes to the template myself, so take a look if you want.

http://forums.otakutalk.com
PM Stats: Feature Suggestion
Border: Maybe a setting?
Options: Well, they should take effect but well, I'm not sure how to set a default for radio buttons.

Now for the changes, post a screenshot, as I'm not registering.

DaPro
21 Apr 2006, 04:29
As requested.

King Kovifor
22 Apr 2006, 17:10
Hey DaPro,

I like some of those changes! Do you mind if I try to incorporate them into my next release?

DaPro
22 Apr 2006, 21:22
Hey, no not at all. Just PM me and I will send you a text file with my welcomepanel template information. :-)

King Kovifor
22 Apr 2006, 22:15
Now your panel, can be used by everybody. :)

Muderman24
22 Apr 2006, 23:41
Which xml file do i install? I'm upgrading to the new version just released. There are quite a few in the 2.0 folder.

v2b2?
v2rc1?
v2b3?
v21?
v2b1?
v2b4?

hotwheels
23 Apr 2006, 00:56
It should be v21 friend.

hotwheels
23 Apr 2006, 01:06
Great job king.............Love the new look

icemann
23 Apr 2006, 03:07
Very nice indeed. :)

Muderman24
23 Apr 2006, 15:31
When I upgraded I don't see any changes from the way I had it before.

King Kovifor
23 Apr 2006, 16:28
When I upgraded I don't see any changes from the way I had it before.
If you install v21.xml you should have noticed some arrows before the info on the right. To get "the new design" I talked about, you need to edit in the vBOptions the "Welcome Panel Style" to "No".

Thanks guys for the compliments. If your using Style Option #2 that was ALL DaPro.

Note:

Within the next week there will be a "v2.1.1" being released. It'll include some minor bug fixes with my template.

Muderman24
23 Apr 2006, 20:48
If you install v21.xml you should have noticed some arrows before the info on the right. To get "the new design" I talked about, you need to edit in the vBOptions the "Welcome Panel Style" to "No".

Did that and still no difference.

King Kovifor
24 Apr 2006, 22:58
What's your template look like?

Connector
28 Apr 2006, 21:43
Hello ,

I have installing this .. but i dont see the Welcome Panel ? i go to VBoptions and i see everything is yes so i'm not sure what more i need to show them in the forum home ?

Thanks.

King Kovifor
28 Apr 2006, 22:46
Hello ,

I have installing this .. but i dont see the Welcome Panel ? i go to VBoptions and i see everything is yes so i'm not sure what more i need to show them in the forum home ?

Thanks.

1. Did you install the original hack?
2. When that's done, make sure all the settings are filled in!

Connector
29 Apr 2006, 00:51
Ohh Nevermind i just found it i have to install the other hack. :)

Snake
29 Apr 2006, 14:12
Thanks for the update, King! :D

King Kovifor
29 Apr 2006, 14:47
Glad you like it Lil Ripsta and Glad you figured it out!

Wordplay
10 May 2006, 17:23
with this welcome panel will i still have this problem:
http://www.vbulletin.org/forum/showpost.php?p=970493&postcount=118

King Kovifor
10 May 2006, 20:30
I believe that the queries are set up to work on the INDEX only, but I did the template and settings, nothing else.

Wordplay
10 May 2006, 21:40
thanks alot for replying.

so there's no (for non coders) way of making them work on other pages?

lasto
18 May 2006, 22:27
it displays at the top of the board - how can i change the location as i have a set place for it but cant see where it is called in.

I hate these plugins :(

In forumhome template i never entered any code so what is calling it in at the top of the page as i need to move it below somehting

King Kovifor
20 May 2006, 22:03
it displays at the top of the board - how can i change the location as i have a set place for it but cant see where it is called in.

I hate these plugins :(

In forumhome template i never entered any code so what is calling it in at the top of the page as i need to move it below somehting
To both of you, I'm not sure

And sorry for the late reply.

N-0p3rz
07 Jun 2006, 12:21
How can I change the font size on the welcome panel??

I read every post in this thread..

None really helped..

King Kovifor
14 Jun 2006, 14:32
How can I change the font size on the welcome panel??

I read every post in this thread..

None really helped..
It can be done through HTML, I'm not exactly sure which tag though...

N-0p3rz
14 Jun 2006, 14:33
I actually gave up on this.. and just created my own panel =/

King Kovifor
14 Jun 2006, 14:35
I'm sorry to hear that... I never get the subscribe e-mails, which are leading to bad support!

King Kovifor
14 Jun 2006, 14:36
I'm sorry to hear that... I'm not getting the subscribe e-mails, which is causing some bad support.

Wifey
22 Jun 2006, 19:34
Hey King, I really want to install this! My problem is the installs from the hack that zero tolerance wrote. I have his old hack, and the panels work 3.0 work just fine except for the avatar. Any ideas on how I can get your hack to work since his doesn't work with my version, which is 3.5.4?

Wait, forget it. I think I figured it out and I feel like a real blonde now!

Oh. My. God.

I love you! This hack fixed what I desperately needed it to! Thank you so much!

edit: Hrm, well maybe. I need to look into this some more.

Wifey
22 Jun 2006, 20:13
Okay, I'm double posting.

I need a log in on the guest welcome panel as my navbar is completely customized. Can this be added and if so, where?

King Kovifor
22 Jun 2006, 21:26
Okay, I'm double posting.

I need a log in on the guest welcome panel as my navbar is completely customized. Can this be added and if so, where?
Did you remove it? But if you need it the code is this:

<!-- login form -->
<form action="login.php?do=login" method="post" onsubmit="md5hash(vb_login_password, vb_login_md5password, vb_login_md5password_utf, $show[nopasswordempty])">
<script type="text/javascript" src="clientscript/vbulletin_md5.js?v=$vboptions[simpleversion]"></script>
<table cellpadding="0" cellspacing="$stylevar[formspacer]" border="0">
<tr>
<td class="smallfont"><label for="navbar_username">$vbphrase[username]</label></td>
<td><input type="text" class="bginput" style="font-size: 11px" name="vb_login_username" id="navbar_username" size="10" accesskey="u" tabindex="101" value="$vbphrase[username]" onfocus="if (this.value == '$vbphrase[username]') this.value = '';" /></td>
<td class="smallfont" colspan="2" nowrap="nowrap"><label for="cb_cookieuser_navbar"><input type="checkbox" name="cookieuser" value="1" tabindex="103" id="cb_cookieuser_navbar" accesskey="c" />$vbphrase[remember_me]</label></td>
</tr>
<tr>
<td class="smallfont"><label for="navbar_password">$vbphrase[password]</label></td>
<td><input type="password" class="bginput" style="font-size: 11px" name="vb_login_password" id="navbar_password" size="10" accesskey="p" tabindex="102" /></td>
<td><input type="submit" class="button" value="$vbphrase[log_in]" tabindex="104" title="$vbphrase[enter_username_to_login_or_register]" accesskey="s" /></td>
</tr>
</table>
<input type="hidden" name="s" value="$session[sessionhash]" />
<input type="hidden" name="do" value="login" />
<input type="hidden" name="vb_login_md5password" />
<input type="hidden" name="vb_login_md5password_utf" />
</form>
<!-- / login form -->

Wifey
25 Jun 2006, 22:32
Ugh, no and I have no idea what's going on! Now, I can't even SEE the guest welcome panel when I log out! I tried uninstalling then reinstalling...any ideas?

King Kovifor
25 Jun 2006, 22:58
Ugh, no and I have no idea what's going on! Now, I can't even SEE the guest welcome panel when I log out! I tried uninstalling then reinstalling...any ideas?
Well, what guest panel? The login section? May I suggest reverting all templates you modified?

Wifey
25 Jun 2006, 22:59
The guest panel that's part of your hack. It will say welcome back unregistered. Would it be a problem in my formhome template?

Actually no, I have it on a style where there are no modified templates and it doesn't work when you're logged out on that userstyle when it used to. I'm using the v211 :)

King Kovifor
25 Jun 2006, 23:05
The guest panel that's part of your hack. It will say welcome back unregistered. Would it be a problem in my formhome template?

Actually no, I have it on a style where there are no modified templates and it doesn't work when you're logged out on that userstyle when it used to. I'm using the v211 :)
It should only show if your logged in.

Wifey
25 Jun 2006, 23:15
Oooo, okay. Well then that solves it. I had it showing up originally when they were unregistered. My last one used to show up when they weren't registered and allowed you to log in and had an avatar that said No avatar selected.

I'll have to add it somewhere, but that would be a great addition to this hack -- have it show up when you're not registered :)

I love it though, my members love this new panel!

Wifey
28 Jun 2006, 22:57
Just curious:

Welcome Back! There have been posts and threads since your last visit at 1151529884. The time is now 04:49 PM, on 06-28-2006. You have 0 unread Private Messages.
Please view the latest announcement, Colored Username Restrictions!

For some reason that long number is showing as the time and I'm not fetching the posts and threads...any idea?

King Kovifor
28 Jun 2006, 22:59
Not a clue. Try reinstalling the plugins - reverting template edits.

Wifey
28 Jun 2006, 23:10
Alrighty :) Thanks!

JollyJack
16 Jul 2006, 17:00
i have got this running on 3.6, where do you change useful links

King Kovifor
16 Jul 2006, 18:30
i have got this running on 3.6, where do you change useful links
there is a 3.6 version & thread but it's in your vb options -> welcome panel template rewrite

paul41598
20 Jul 2006, 14:53
is this template mod user selectable? If not, can it be? I think it'd be better if the user could select it from their CP, if they choose to use it.

King Kovifor
21 Jul 2006, 19:27
is this template mod user selectable? If not, can it be? I think it'd be better if the user could select it from their CP, if they choose to use it.
Nope, sorry. It's your choice to make it easier to edit it. Might Work it in!

paul41598
21 Jul 2006, 19:59
Ya I wrote a condition to make it user selectable. Thanks!

King Kovifor
21 Jul 2006, 22:42
Ya I wrote a condition to make it user selectable. Thanks!
Glad it worked out for ya.

GreysAnatomy
24 Jul 2006, 10:05
Is there a way to add a border around the avatar? I could find the following code inside the forumhome_welcomepanel and messed around with it but couldn't get it to work. :(

<!-- Avatar Block -->
<tr>
<td class="alt1" align="center" width="1%">
<a href="profile.php?{$session[sessionurl]}do=editavatar">{$bbuserinfo['avatar_build']}</a>
</td>
<!-- End Avatar Block -->

Can anyone please tell me what I have to do in order to get a border around my avatars? The avatars in my postbit_legacy are all class="tborder" 1px solid and I'd like the ones on the welcome panel to have the same kind of boder. Thanks in advance!

King Kovifor
24 Jul 2006, 14:23
the avatar build is in the plugin. Not too sure where though. I'll poke around though.

bashy
30 Jul 2006, 22:01
Hi

I have this installed, but its not showing, product is enabled and the options in vb options are set to yes, any ideas please,
ps. my forumhome is fairly modded!!

King Kovifor
31 Jul 2006, 01:23
bashy,

have you installed the plugins from Zero Tolerence's hack?

bashy
31 Jul 2006, 09:04
Dont be daft....why should i have read this bit, (This hack will not work if...

You must install this hack (Zero Tolerence's Welcome Panel) before my hack will work. It requires the plugins. Just don't follow the installation instructions for the template.)...... im above that.....:o.....im on it :) thanks..cant beleive i missed that this time round...I am not worthy lol

King Kovifor
31 Jul 2006, 18:16
Dont be daft....why should i have read this bit, (This hack will not work if...

You must install this hack (Zero Tolerence's Welcome Panel) before my hack will work. It requires the plugins. Just don't follow the installation instructions for the template.)...... im above that.....:o.....im on it :) thanks..cant beleive i missed that this time round...I am not worthy lol
Either I'm getting mixed messages or i'm misreading that post. At first it should like "Don't be stupid" and than it's like thanks... so mixed. LOL.