Register Members List Search Today's Posts Mark Forums Read

Reply
 
Mod Options
vbBux / vbPlaza v1.5.8 (Points + Store System) Details »
vbBux / vbPlaza v1.5.8 (Points + Store System)
Mod Version: 1.5.8, by CMX_CMGSCCC (Member) CMX_CMGSCCC is offline
Developer Last Online: Sep 2014 I like it Show Printable Version Email this Page

This thread is in the Modification Graveyard.
vB Version: 3.5.4 Rating: (43 votes - 4.88 average) Installs: 771
Released: 02 Feb 2006 Last Update: 13 Jul 2006 Downloads: 343
Not Supported DB Changes Uses Plugins Template Edits Additional Files  

vbBux / vbPlaza v1.5.8 by CMX (http://www.cmgsccc.com)
Official Homepage - http://www.vbplaza.com

v1.5.7 AND HIGHER are now compatible with vBulletin v3.5.x and v3.6.x

Welcome to the largest points/store system for vBulletin! READ THE ENTIRE POST AGAIN AS THERE HAVE BEEN CHANGES SINCE THE CONVERSION TO vbBux / vbPlaza!!

Credits: MrZeropage for ibProArcade Support, John for v3 Arcade Support, Caimakale for various additions including ribbons and his other addons for vbPlaza, defi for the addon for Paypal Subscriptions.

New Premium Modification Forum: http://www.vbulletin.org/forum/forumdisplay.php?f=171
If you post a new thread in there, it will be easier to track the answer to your thread folks!

Now with 135 Options for purchasing at your forums and this is still rising folks!

NOTE: As of this version, there is a Template Patcher helper inside the Admin CP. Admin CP -> vbPlaza Maintenance -> Auto Patch Templates, when you run this the first time, it will just list the changes that it has found/not found. If you press Attempt Auto Patches, it will modify the template changes it has found only. It will also modify all styles for your forums. I have tested this on all 3 of my licensed vBulletin production websites and the patches all worked great.

UPDATED MUST READ NOTES:
1) RE-READ THE UPGRADING OR NEW INSTALLATION INSTRUCTIONS AS THEY HAVE CHANGED FROM THE PREVIOUS VERSIONS!!
2) IF UPGRADING FROM A PREVIOUS VERSION OF eBux / eStore. YOU MUST INSTALL THIS ONE FIRST TO SAVE YOUR SETTINGS. (BUT YOU WOULD KNOW THIS IF YOU READ THE UPGRADING INSTRUCTIONS!! DONT SAY I DIDNT WARN YOU!!)

Branding Free Option
If you have donated in the past, you can get the Branding Free Option for Free by sending CMX a PM on the http://www.vbplaza.com/forums Message Board.
Otherwise, you will need to purchase it by signing up for an account at http://www.vbplaza.com/forums/register.php and then going to http://www.vbplaza.com/forums/payments.php

Features List:
This section has been moved due to its length. Look in the file included insize the zip named features.txt.

Release Notes:
This section will only show the most recent changes. For the rest of the changes, look in the file included inside the zip named changes.txt.

NOTE: If you want ibProArcade, v3 Arcade or vBookie integration now, you'll have to install the appropriate Addon included in the download. The reason for these parts being packaged as Addons, is to make the install a little smaller for users who do not have an Arcade, and because both Arcades cant be installed simultaneously as well. So it saves space only installing the one that you currently have.

v1.5.8 Updates:
1) Bugfix: Quick editing a post with BB Codes, modified the post directly instead of modifying a copy.
2) Bugfix: Some phrases fixed.
3) Bugfix: TABLEPREFIX bug has been fixed.
4) Bugfix: Addon Product XML sheets do not have executionorder in them anymore for vB 3.5 compatibility.

Database Backups Recommended!
Although I have upgraded 3 forums with this script already, it IS recommended that you backup your database before installing this product!!

Upgrading Instructions:
NOTE: THESE INSTRUCTIONS ARE FOR UPGRADING IF YOU HAD A PREVIOUS VERSION OF eBux / eStore INSTALLED!!
1) DO NOT UNINSTALL eBux / eStore (UNLESS YOU WANT TO LOSE ANY AND ALL SETTINGS.)
2) Reupload all of the files in the upload folder to your forum's root folder. Make sure that all files are being overwritten. Do not move on to the next step until all files are transferred successfully!
NOTE: It could take a long time to install if you have a lot of registered users, be PATIENT! It should display the messages as it goes along to let you know that it IS working.
3) After finished with step 2!! Reimport the product-vbbuxplaza.xml file via Admin CP -> Plugin System -> Manage Products -> Add/Import Product. Make sure that Allow Overwrite is set to YES.
4) Refresh the Admin CP and you will see all of the vbBux / vbPlaza Admin CP features at the top.
5) UNINSTALL THE OLD eBux / eStore NOW!! Go to Admin CP -> Plugin System -> Manage Products -> eBux / eStore -> Uninstall.
6) You can delete all files/folders that have the word estore or elottery in them from the FTP as well.
7) You will need to redo the template edits listed below as almost all of them have changed since the previous eBux / eStore.

If upgrading from a previous version of vbBux / vbPlaza follow these instructions:
1) Reupload all of the files in the upload folder to your forum's root folder. Make sure that all files are being overwritten. Do not move on to the next step until all files are transferred successfully!
2) After finished with step 2!! Reimport the product-vbbuxplaza.xml file via Admin CP -> Manage Products -> Add/Import Product. Make sure that Allow Overwrite is set to YES.
3) Refresh the Admin CP and get to checking your settings!
NOTE: You will be happy know that NO templates have been updated from v1.5.0 to v1.5.2!

New Installation Instructions:
1) Upload all of the files/folders in the UPLOAD folder to your forum's root folder.
2) Import the product-vbbuxplaza.xml via Admin CP -> Manage Products -> Add/Import Product.
NOTE: It could take a long time to install if you have a lot of registered users, be PATIENT! It should display the messages as it goes along to let you know that it IS working.
3) Refresh the Admin CP and start setting up your settings!
4) You will need to do all of the template edits listed below as well.

Template Edits:
A) Inside templates 'postbit' AND 'postbit_legacy':

Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Replace With:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Next Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Replace With:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Then Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Replace With:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Then Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Add Below:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

B) Inside template 'navbar':

Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Add Below:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Then Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Add Above:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

C) Inside template 'MEMBERINFO':

Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Replace With:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Next Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Replace With:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Then Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Add Above:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

D) Inside template 'forumrules':

Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Add Below:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

E): Inside template 'USERCP_SHELL':

Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Add Above:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

F): Inside template 'threadbit':

Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Replace With:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

vBulletin 3.5.x Only Edit:

Next Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Replace With:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.


vBulletin 3.6.x Only Edit:

Next Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Replace With:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

G): Inside template 'memberlist_resultsbit':

Find:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Replace With:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

-CMX

Download Now

Only licensed members can download files, Click Here for more information.

Addons

Show Your Support

  • This modification may not be copied, reproduced or published elsewhere without author's permission.
  #3676  
Old 13 Aug 2006, 14:08
FeNeRisT's Avatar
FeNeRisT FeNeRisT is offline
 
Join Date: Apr 2006
can anyone help me please

Last edited by FeNeRisT; 13 Aug 2006 at 14:13.
Reply With Quote
  #3677  
Old 13 Aug 2006, 18:12
bogie bogie is offline
 
Join Date: Jan 2006
If upgrading from a previous version of vbBux / vbPlaza follow these instructions:
1) Reupload all of the files in the upload folder to your forum's root folder. Make sure that all files are being overwritten. Do not move on to the next step until all files are transferred successfully!
2) After finished with step 2!! Reimport the product-vbbuxplaza.xml file via Admin CP -> Manage Products -> Add/Import Product. Make sure that Allow Overwrite is set to YES.
3) Refresh the Admin CP and get to checking your settings!
NOTE: You will be happy know that NO templates have been updated from v1.5.0 to v1.5.2!
There is something missing from these upgrade instructions. I've tried it twice and both times it went wrong. The first time I followed the directions exactly and lost my ACP (white screen with ?>). The second time I uninstalled the old xml file after uploading the files in the upload folder and lost everything in the database. The instructions say nothing about what to do with the old xml and when.

I would appreciate any help as I'm trying to get my board upgraded to 3.6.
Reply With Quote
  #3678  
Old 14 Aug 2006, 12:32
Acers's Avatar
Acers Acers is offline
 
Join Date: Feb 2005
Real name: Safin
Originally Posted by movielist
In 3.6, the modification to threadbit that allows users to change the appearance of thread titles works, but when done, new threads are no longer shown as bold.
do this

instead of changing to this in 3.6


Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Replace With:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.


change this


Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Replace With:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

will work
Reply With Quote
  #3679  
Old 16 Aug 2006, 01:17
G_Man's Avatar
G_Man G_Man is offline
 
Join Date: Feb 2006
Real name: Wade
Originally Posted by Acers
do this

instead of changing to this in 3.6


Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Replace With:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.


change this


Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

Replace With:

Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.

will work

Gonna try that right now. Worked a TRICK!!! NICE!!!


and in case anyone can help... when trying to edit my forums now...


Block Disabled:      (Update License Status)  
Suspended or Unlicensed Members Cannot View Code.


help?
__________________
www.afterseppuku.com
Feel free to check it out and tell me what I can do better.
Make Money.

Last edited by G_Man; 16 Aug 2006 at 01:24.
Reply With Quote
  #3680  
Old 16 Aug 2006, 02:25
MorrisMcD's Avatar
MorrisMcD MorrisMcD is offline
 
Join Date: Nov 2003
Real name: Brian
I am having some issues recently where the lotto isnt being paid out.. Also, paychecks are not paid.. Frustrating... Anyone have an idea why this would do this?
Reply With Quote
  #3681  
Old 16 Aug 2006, 21:18
Weegie2004 Weegie2004 is offline
 
Join Date: Aug 2005
I just installed it with VB 3.5.4, everything is working perfectl, except for one thing, all of my thread titles seem to be duplicated, see screenshot. Im a bit of a Vbulletin rookie, so could anyone point me in the right direction?
Attached Images
File Type: jpg scrnsht.JPG (15.6 KB, 20 views)
Reply With Quote
  #3682  
Old 16 Aug 2006, 21:26
theorigin theorigin is offline
 
Join Date: Dec 2005
I have a question, but I'm sure it's been asked before..How do you set up a forum where you can buy access? I set it up when I created a new forum, but in the vbPlaza, it said that there were no forums available to buy access for. Can someone help?
Reply With Quote
  #3683  
Old 17 Aug 2006, 12:12
fly fly is offline
 
Join Date: Oct 2003
PLEASE POST ALL SUPPORT QUESTIONS IN THE SUPPORT FORUM
Reply With Quote
  #3684  
Old 19 Aug 2006, 05:21
tazB.ca's Avatar
tazB.ca tazB.ca is offline
 
Join Date: Sep 2005
Real name: Taz B
can u make add on for this system or tha intagrated one to vbookie replaces tha current reputation system...and watever ur rep power is is wat cash u give someone,i dont like this for my site it basiclly makes rep power useless
Reply With Quote
  #3685  
Old 19 Aug 2006, 05:24
tazB.ca's Avatar
tazB.ca tazB.ca is offline
 
Join Date: Sep 2005
Real name: Taz B
Originally Posted by Weegie2004
I just installed it with VB 3.5.4, everything is working perfectl, except for one thing, all of my thread titles seem to be duplicated, see screenshot. Im a bit of a Vbulletin rookie, so could anyone point me in the right direction?

That happen to me too....i had to re-do tha template edits...............
Reply With Quote
  #3686  
Old 19 Aug 2006, 22:00
Bugtap's Avatar
Bugtap Bugtap is offline
 
Join Date: May 2006
Real name: Dave
When I try and install, I get:

Could not find phrase 'vbplaza_functions_vbplaza_not_uploaded'.
help?
Reply With Quote
  #3687  
Old 21 Aug 2006, 05:08
kru89 kru89 is offline
 
Join Date: May 2006
how do i completely remove vbvbux/vbplaza? when i delete the plugin folder.. the forum get lots of error.. plz give me manual to COMPLETE unistall.. thanks
Reply With Quote
  #3688  
Old 21 Aug 2006, 12:28
fly fly is offline
 
Join Date: Oct 2003
Originally Posted by kru89
how do i completely remove vbvbux/vbplaza? when i delete the plugin folder.. the forum get lots of error.. plz give me manual to COMPLETE unistall.. thanks
uninstall the product. delete all files you uploaded. done.
Reply With Quote
  #3689  
Old 21 Aug 2006, 17:36
bada_bing's Avatar
bada_bing bada_bing is offline
 
Join Date: Feb 2004
Will this work on vb 3.5.3 ?
Reply With Quote
  #3690  
Old 21 Aug 2006, 17:50
fly fly is offline
 
Join Date: Oct 2003
Originally Posted by bada_bing
Will this work on vb 3.5.3 ?
Why would you be running that?
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Mod Options

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


New To Site? Need Help?

All times are GMT. The time now is 06:49.

Layout Options | Width: Wide Color: