[Jafo232]

I don't understand your question.. It places users in a moderated group (COPPA) where admins/mods can accept or reject them.

[revitclinic]

Originally Posted by Jafo232

I don't understand your question.. It places users in a moderated group (COPPA) where admins/mods can accept or reject them.

Thank you for your answer. I found it out in CP. I just was thinking I will receive an email, when someone goes automatically for moderation, but I saw, I can see it just in control panel.

[giorgino]

How can I add and IP address to "white list" like this:

255.xxx.xxx.xxx ?

In other words, how can I add a "array" of IP addresses that aren't knew by system?

[The_Hawk]

Seems new registrations aren't happening anymore with users getting a blank screen on this page after filling in all the registration info and hitting OK:

http://www.vwwatercooled.org.au/regi...p?do=addmember

I'm sure this mod WAS working fine with 4.0.2 PL4 but has since given up the ghost.

As first I thought it was a vBulletin problem so I upgraded to 4.0.3, still no working. I then through it was the vbSEO I installed last week (3.0.5 RC3) so I uninstalled that, still no dice. Then I turned off the country mod and BAM, users can register again.

Re-installed vbSEO, still working.
Uninstalled Country Mod (rather than just disabled) - still working.
Re Installed Country Mod - Not working.
I have re-uploaded the zone files, I have re-uploaded the mod files - still not working
Disabled country mod - working again.

Is there a common fault here or is it just something I have done wrong?

(on a side note all of this DID happen on or about when I install vbSEO so I'm still thinking that's the problem, although technically by completely uninstalling it should have solved the problem... but it didn't)

[fluidswork]

great mod ..............

[Doctor Death]

In the options for this.... it says

Zone Files
You need to download zone files If you see an error below, then you did not upload the zone files yet (see readme).

Is that normal? I have the zone files installed.

[karrerax]

This pluguin is FANTASTIC my Forum has Spamers from China every Day.
It works perctly!

thank youuuuuu

[giorgino]

In Italy libero.it has milions of users and the plugin block this users...

Can I add one series of IP? (like 155.x.x.x)

[Marv]

Originally Posted by Doctor Death

In the options for this.... it says

Zone Files
You need to download zone files If you see an error below, then you did not upload the zone files yet (see readme).



Is that normal? I have the zone files installed.

I 2nd that. Intsalled following the readme but it doesnt work for me. Am I doing something wrong ?

[Marv]

I see the developer wasn´t responding here for quite a while. Can anyone confirm

• what The_Hawk mentioned above ?
• that this mod works with 4.0.3 ?

[The_Hawk]

Originally Posted by Marv

I see the developer wasn´t responding here for quite a while. Can anyone confirm

• what The_Hawk mentioned above ?
• that this mod works with 4.0.3 ?

Not so much. With 4.0.3 PL1 it still seems to prevent anyone from registering at all. After filling in the registration details and hitting submit I just get a white page here: http://www.vwwatercooled.org.au/regi...p?do=addmember and nothing happens.

I'm still working my way through the other mods I have installed to see if there is a conflict, although nothing has come up yet.

VBSEO is updated to 3.5.0 Gold, and I have tried re-installing again today, still no dice. Does anyone have this working with 4.0.3 PL1?


EDIT: To confirm, I have now been through ALL of my mods and disabled everything and it still doesn't work so I'm not sure what's up here.

[Jafo232]

I am using it on 4.0.3 with no issues, so I cannot speak to what is happening to "The Hawks" server. A blank screen is useless information. You have to look in your server log to find out WHAT the error is. It could be something as simple as not uploading the files properly.

Short answer, yes, it works for 4.0.3...

[The_Hawk]

Originally Posted by Jafo232

You have to look in your server log to find out WHAT the error is.

No problems, been getting round to doing a little more digging, really should have just started in the logs, but then I'm very much still learning as I move along.

It seems it might just be as simple as an out of memory error:

[Thu May 27 09:58:58 2010] [error] [client xxx.xxx.xxx.xxx] PHP Fatal error: Allowed memory size of 33554432 bytes exhausted (tried to allocate 88 bytes) in /var/www/vhosts/vwwatercooled.org.au/httpdocs/plugins/whois.php on line 35, referer: http://www.vwwatercooled.org.au/register.php

We absolutely have to move to a bigger better server VERY soon anyway, so hopefully that will fix this problem too.

[Jafo232]

Your memory_limit setting in your php.ini file is rather low (32 Megabytes). If you bump that up and restart apache, the issue will most likely go away. I would try 64M.

[The_Hawk]

Originally Posted by Jafo232

Your memory_limit setting in your php.ini file is rather low (32 Megabytes). If you bump that up and restart apache, the issue will most likely go away. I would try 64M.

Many thanks, that did the trick and it all seems to be working under 4.0.3 PL1 here now