[Bounce]

Thanks for this,very good

Now...... How do I move the box to below the forums on forumhome, is this possible? lol

[cherylferraro]

Thank you for this mod, I know our users will appreciate it.

I do have one problem. The description of the mod indicates "If the chat is empty, a simple "No one is currently using the chat." message is displayed."

On the forum home page it displays correctly:



On the other pages, such as the thread display page, it looks like this:



What can I do to fix this?

[Mosh]

Originally Posted by cherylferraro

Thank you for this mod, I know our users will appreciate it.

I do have one problem. The description of the mod indicates "If the chat is empty, a simple "No one is currently using the chat." message is displayed."

On the forum home page it displays correctly:



On the other pages, such as the thread display page, it looks like this:



What can I do to fix this?

This is a classic sign that you have not done all 3 edits in Step 3 of the installation instructions ..... these edits need to be done to show the stats on other pages apart from the forumhome, otherwise they will be blank outside of the forumhome page.

[cherylferraro]

Thank you for your prompt response.

I did complete each of the edits on Members in Flashchat 5 (2). Perhaps I have done something wrong... If you don't mind I will post the Members in Flashchat 5 (2) that I am using.

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

[Mosh]

Originally Posted by cherylferraro

Thank you for your prompt response.

I did complete each of the edits on Members in Flashchat 5 (2). Perhaps I have done something wrong... If you don't mind I will post the Members in Flashchat 5 (2) that I am using.

Try this instead, as I know it works:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

[cherylferraro]

I tried using the code you provided and the display is still incorrect.

I am also using vbadvanced and vbseo on this forum, could one of those cause this problem?

[Mosh]

Originally Posted by cherylferraro

I tried using the code you provided and the display is still incorrect.

I am also using vbadvanced and vbseo on this forum, could one of those cause this problem?

Yes, it is more than likely. People have used this with vBSEO without issue (so is probably not the culprit, but it is possible), so I would suspect that vBAdvanced is the probable case of the issue.

You may need to globalise some variables due to the fact that you have vBA installed, so check out my profile and look at the flashchat hacks that I wrote for vBA (but no longer support them) and look at the installation steps that mention Portal Output Global Variables, entering the three variables is your most likely way of getting this to work.

However, the above is only a suggestion, as I will not provide support to get this to work with vBA (or vBSEO), so if it works, then it is all good, if not, then there is nothing I can do to help further.

[Greek76]

Originally Posted by Mosh

Try this instead, as I know it works:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

That code worked for me. I had the same problem like the other poster. I have vbseo and vbadvanced installed aswell.

[Mosh]

Originally Posted by Greek76

That code worked for me. I had the same problem like the other poster. I have vbseo and vbadvanced installed aswell.

The code I posted is just the edits in Step 3 done correctly, there are no differences from the installation instructions.

By the way, if you are using this hack, then please click Mark as Installed.

[jammiedodger546]

Hi Mosh, I just paid the $5 to find that the intergration mods aren't compatible with 3.8.0? Or am I missing something?

[Mosh]

Originally Posted by jammiedodger546

Hi Mosh, I just paid the $5 to find that the intergration mods aren't compatible with 3.8.0? Or am I missing something?

I see you have posted in Paul M's support thread, wait for an answer there, as I have nothing to do with the integration, and it clearly states in the first post:

Originally Posted by 1st Post

Hack Support - snippet

I will not be providing any support at all to people who have not clicked Mark as Installed.

NOTE: I am only providing support for this hack only, and not any of the other hacks that need installing and working 100% before installing this one, if they are not working 100% then ask in the relevant thread for help, and not this one.

[Mosh]

Originally Posted by jammiedodger546

Hi Mosh, I just paid the $5 to find that the intergration mods aren't compatible with 3.8.0? Or am I missing something?

I have answered the question in Paul M's support thread, as it is bound to be asked a few times.

Do note though, that the post above this one still applies.

[jammiedodger546]

Originally Posted by Mosh

I have answered the question in Paul M's support thread, as it is bound to be asked a few times.

Do note though, that the post above this one still applies.

Thanks Mosh. Sorry, I should have read the original mod post before.

[Mosh]

Update: v3.8.002
-- Updated: To bring in line with Paul M's Members who are chatting in Flashchat 5 hack v3.8.001
-- Changed: Install code
-- Changed: Instructions