[TheLastSuperman]

How to Customize the Template:
I will update this as questions are posted.

Currently the mod shows these Ads to Guest and Members, to show this only to Members OR Guest edit the template postbit_legacy_ads_after_firstpost and find:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

Remove the $show['guest'] and the OR to show this to Members only.
Remove the OR and the $show['member'] to show this to Guest only.

Currently the mod has a link to REGISTER on your site as the post title per say, to change this link if your NOT showing this to Guest Only edit the same template as above and find:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

Replace the <a href="register.php">Register to remove these Ads!</a> with your link OR text.

• Please see post #'s 6 & 7 for codes to display this after a certain post on each page not simply after the first post!
• More information on vB4 Conditionals can be found here: http://www.vbulletin.org/forum/showthread.php?t=231525 Special thanks should go to BBR-APBT for taking the time to write that article.

How to locate the templates:

AdminCP > Styles & Templates > Style Manager > *Select Edit Templates in the drop-down for your style. While scrolling through the templates some are titles for a group of templates so we have added two new templates by installing this mod and they are located within the CSS Templates and the Posbit Templates "Families".

In the Postbit Templates find the template postbit_legacy_ads_after_firstpost to paste your AD codes or well.. anything!
In CSS Templates find the template adsafterfirstpost.css to adjust the CSS as desired.

Additional Info to add these ads after any post or before the last

Originally Posted by karlm

Good stuffs, Clark. Can it be set so as you can choose which post # the ads go to? i.e. atm, they're forced after post #1... but What if I wanted it to be on post #9 instead?

Originally Posted by TheLastSuperman

Hmm you should be able to, open the template postbit_legacy_ads_after_firstpost and find:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

Replace with:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

Replace the ? mark with the post number you want the Ads to show after and DO NOT include a trailing </vb:if> as it's already near the bottom .

Let me know if that works .

Originally Posted by karlm

Oooooor, I might want it so it's always the 'last but one' post..?

Originally Posted by TheLastSuperman

Well that depends on your post per page settings:

AdminCP > settings > Options > Thread Display Options (showthread) > Maximum Displayed Posts Before Page Split



So if you have that set to 20 posts per page before the split simply use the code I just posted above and change the ? mark to 19 .

Example:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

[TheLastSuperman]

How to Customize the CSS:
I will update this as questions are posted.

In CSS Templates find the template adsafterfirstpost.css to adjust the CSS as desired.

*The Height and Width of the Ad container and the inner Left and Right Ad containers even though it shows in the screenshot and says max height of 260, can all be adjusted in the CSS template .
*You can fully customize the template to show something other than ads, be creative and post if you have questions!

[karlm]

Good stuffs, Clark. Can it be set so as you can choose which post # the ads go to? i.e. atm, they're forced after post #1... but What if I wanted it to be on post #9 instead?

[karlm]

Oooooor, I might want it so it's always the 'last but one' post..?

[TheLastSuperman]

Originally Posted by karlm

Good stuffs, Clark. Can it be set so as you can choose which post # the ads go to? i.e. atm, they're forced after post #1... but What if I wanted it to be on post #9 instead?

Hmm you should be able to, open the template postbit_legacy_ads_after_firstpost and find:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

Replace with:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

Replace the ? mark with the post number you want the Ads to show after and DO NOT include a trailing </vb:if> as it's already near the bottom .

Let me know if that works .

[TheLastSuperman]

Originally Posted by karlm

Oooooor, I might want it so it's always the 'last but one' post..?

Well that depends on your post per page settings:

AdminCP > settings > Options > Thread Display Options (showthread) > Maximum Displayed Posts Before Page Split

Maximum Displayed Posts Before Page Split
The number of posts to display on a thread page in linear or hybrid mode before splitting it over multiple pages.

Note: This number must be at least 1.

So if you have that set to 20 posts per page before the split simply use the code I just posted above and change the ? mark to 19 .

Example:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

[hardfm]

and if I wish to have this every 2 posts? so after 2nd, 4th and 6th and so on?

[karlm]

Originally Posted by hardfm

and if I wish to have this every 2 posts? so after 2nd, 4th and 6th and so on?

You'd get a lot of very annoyed viewers...

[TheLastSuperman]

Originally Posted by hardfm

and if I wish to have this every 2 posts? so after 2nd, 4th and 6th and so on?

Then do the same thing I posted above i.e.

Originally Posted by TheLastSuperman

Hmm you should be able to, open the template postbit_legacy_ads_after_firstpost and find:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

Replace with:

Block Disabled:      (Update License Status)
Suspended or Unlicensed Members Cannot View Code.

Replace the ? mark with the post number you want the Ads to show after and DO NOT include a trailing </vb:if> as it's already near the bottom .

Let me know if that works .

If you meant show the ads after the 2nd, 4th, and 6th then karlm is speaking the truth imo, they will spite you most likely and tbo if I ever go to a site with ads after the post 2, 4, 6, 8, 10, 12 I'll never register in fact I'll run away from that site in the opposite direction as fast as humanly possible . If you MARK AS INSTALLED I'll be happy to provide the code but head our "warnings" per say and make an informed decision .

Originally Posted by karlm

You'd get a lot of very annoyed viewers...

I think you're correct here but to each his own so if anyone wants something custom simply mark as installed!

[karlm]

Originally Posted by TheLastSuperman

So if you have that set to 20 posts per page before the split simply use the code I just posted above and change the ? mark to 19 .

I don't believe this would work - it would be the last but one on a full page, but it would not show as last but one on a page with 18 replies... I haven't downloaded/installed as yet because I currently do not feel any pressing need, however, I do recognize it's potential and think it's a great assistant for those who may want help.

[TheLastSuperman]

Originally Posted by karlm

I don't believe this would work - it would be the last but one on a full page, but it would not show as last but one on a page with 18 replies... I haven't downloaded/installed as yet because I currently do not feel any pressing need, however, I do recognize it's potential and think it's a great assistant for those who may want help.

Well in that case you could simply add in a <vb:elseif condition= to accommodate, remember with the mod you released that's template edits similar to this for vB3, elseif was not available but in vB4 it is .

[halkum]

Originally Posted by karlm

You'd get a lot of very annoyed viewers...

Not to mention a ton of the ad companies do not allow multiple placements on one page, and can even dock your payout, or suspend the account. Others don't even count the click and views.

Nice mod

[TheLastSuperman]

Originally Posted by halkum

Not to mention a ton of the ad companies do not allow multiple placements on one page, and can even dock your payout, or suspend the account. Others don't even count the click and views.

Nice mod

Best bet is to check their TOS or other related information for all the details and make sure your not violating any sort of rule etc.

TY, simple enough .

[Aramist]

It's not compatible with vb 4.1 =/

can't proceed with the installation =/